User manual EDIFIER R1200T

[. . . ] Do not block the openings in the speaker cabinets, never push objects into speaker vents or slots because of fire or electric shock hazards, and provide sufficient space around the speakers for proper ventilation. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. For added protection during lightning storms, unplug the speakers from the electrical outlet and turn off the computer. Water and moisture ----Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them. Ventilation ---- Do not block the openings in the speaker cabinets, never push objects into speaker vents or slots because of fire or electric shock hazards, and provide sufficient space around the speakers for proper ventilation. Location ---- Place the speakers in a stable location so they will not fall causing damage to the speakers or bodily harm. Cleaning ---- Unplug the speakers from the computer and from the electrical outlet before cleaning them with a damp cloth. Magnetically shield speakers. Open the packing Please check the speaker pattern marked on the package, Please contact the seller as soon as if you find the speaker is not the pattern you want. R1200T packing list: Overview 1 x subwoofer 5 x satellites 3 x 3. 5 stero /3. 5 stero audio connecting 1 x User's Manual 1. Satellite(Front and Right) 2. Key-press 3. Audio connecting cord 10. User's Manual Introduction of back panel R1200T Multimedia Desktop Theater 1 LINE IN Output of right & front Output of left & front Output of right & surround Output of left & surround Output of centre Input of front Input of surround Input of centre/subwoofer Power Cord 2 FRONT REAR C /SW Speaker Output FR 3 4 5 6 7 8 9 C FL SL SR CONNECTING 1 CONNECTING Connect the satellite speakers to the output splints on the back panel of the Sub-woofer. Please note to match the color, the red-color-coded cable should be connected into the red connector. Using Audio connecting cord , connect the Line-input port of the subwoofer to Line-out of the Audio Device (Such as the computer, Discman, etc) 3 Playing the audio device Plug the AC power plug into the wall outlet and turn on the power switch, Now your speaker system is ready for Use. Adjusting the volume control and the Super bass, then you can enjoy the music. SPECIFICATIONS: Total Power Output: Input Impedance: Input Sensitive: Bass Unit: Tweeter Unit: Frequency Response: Dimension(Subwoofer): Dimension(Satellite): Gross Weight: RMS 6W x 5 + 2 0W 20K Ohm 450 mV 6 Aluminum coil, 8 Ohm 3 Paper coil, 4 Ohm 45 Hz ~ 20 KHz 181(W) x 286(H) x 349(D)mm 93(W) x 154(H) x 99(D)mm About 9. 8 Kg TROUBLESHOOTING No sound: Power, input, speaker cables and connectors all attached and seated?One or more speakers have no or low sound level: Cables all connected properly?Connectors fully seated in soundcard, speakers or Y-adapter (for two-channel cards)?Distortion or buzzing quality to total sound or subwoofer: Turn down computer's sound (control panel) volume, and increase Control Pod volume. [. . . ] One or more speakers have no or low sound level: Cables all connected properly?Connectors fully seated in soundcard, speakers or Y-adapter (for two-channel cards)?Distortion or buzzing quality to total sound or subwoofer: Turn down computer's sound (control panel) volume, and increase Control Pod volume. [. . . ]