User manual ECLIPSE D5II

[. . . ] If you notice any abnormal status, such as an abnormal noise, emission of smoke, or a strange smell, switch the power off, disconnect the cable from the power outlet, and request an inspection. Continuing to use the product in the abnormal status could lead to fire or electric shock. If you drop or break the subwoofer, turn off the power switch on the equipment itself (POWER), remove the plug from the power outlet, then contact Fujitsu Ten. Continuing to use the subwoofer in this condition may lead to fire or electric shock. [. . . ] Using the plug with the dust/metal present can lead to fire or electric shock. Do not place the subwoofer in or overhead or unstable locations, such as on a rickety stand or a platform with a slope. Do not place the subwoofer in a location where it will be exposed to oil smoke or water vapor, such as next to a kitchen work table or humidifier. Do not place the subwoofer in a location where it is struck directly by a cool air stream. Do not place the subwoofer in a location where it is exposed to direct sunlight for long periods of time or close to heating equipment. This can lead to deformation or discoloration of the cabinet, or to fire. Do not rest your weight on the subwoofer (by standing on it or sitting on it). Because it is compact and lightweight, take care when handling the remote control unit. Dropping it or subjecting it to impact can damage it or cause the battery to run down prematurely, leading to malfunctions. Avoid exposing the remote control unit to humidity or dust, and do not subject it to shock or allow any water onto it. ENGLISH - 18 - CAUTION If there is any radio interference due, for example, to proximity to a tuner, install the tuner and subwoofer at a greater distance from each other. If installing the subwoofer directly on flooring, first affix the feet provided as accessories. D5II When the reproduction Multi-channel zone is adjusted at the signal of DVD, etc. player or amplifier OFF Note that the examples given above apply in typical situations, but you can use the setting that you wish to. - 21 - ENGLISH rH. P. F selector switch When signals of frequencies higher than the cut-off frequency after output from the line output terminal o and adjustment by the L. P. F. control w, are output, this switch determines whether this high-frequency output is ON or OFF. When the switch is ON, signals of frequencies higher than the cut-off frequency set with the L. P. F. When the switch is OFF, through signals (with no filtering) are output. tAUTO POWER switch This switch turns the auto power function ON or OFF. When the auto power switch is set to ON, the auto power function operates, meaning that the subwoofer goes into the standby status if no input signal is received for 5 minutes (the POWER indicator switches from blue to red. ) When the next input signal is received, the power is automatically turned back on (the POWER indicator switches from red to blue). When the subwoofer is used at extremely low volumes, set this switch to OFF to avoid erroneous operation. uXLR input terminal This is the terminal where signals are input if the subwoofer (super woofer) output terminal on the AV amplifier or other device, or the amplifier line output terminal, is an XLR connector. iLINE input terminals These terminals input signals from the subwoofer (super woofer) output terminals on the AV amplifier or other device, or e. g. oLINE output terminals These terminals convert the signals input to the input terminals u, i, !0 to the line output level (they are not linked to the volume control on the main unit). !0Speaker input terminals These terminals input the speaker output signals from the amplifier. [. . . ] Alternatively, use a branch cable (sold separately) to connect to both "line in" terminals. - 25 - Example of a 2. 1 channel system Player + amplifier + D5II + TD712z Speaker cable connections SPEAKER Speaker cable (sold separately) TD712z TD712z ENGLISH AV amplifier D5II + - - + + - - + Speaker cable (sold separately) + + eTo power outlet + + Power cable - 26 - Care and Specifications Care Before attending to the care of the subwoofer, be sure to turn the power OFF and remove the power cable plug from the power outlet. Remove any soiling on the subwoofer by wiping lightly with a soft cloth. If the soiling is severe, wet the cloth with water, wring it out well, wipe the soiling off, and then finish with a dry cloth. This could damage the surface of the cabinet. Specifications Please note that the specifications and external appearance of the subwoofer are subject to change without notice for the sake of improvement. [. . . ]