User manual ECLIPSE D5

[. . . ] Speaker Stand (D5) Owner's Manual Thank you for purchasing this high quality speaker stand. [. . . ] Improper use of the stand can result in an unstable condition with the potential to cause an injury by falling. Placing the stand on an uneven surface can lead to overturning and result in an injury. Installing the stand in a location that is unstable can cause it to fall and result in an injury. Pushing over or dragging the stand can result in an injury or cause damage to the floor. The stand is heavy, so be sure 2 or more people cooperate in unpacking or moving it. Improper lifting can cause a back injury and dropping the stand can injure feet. 1 Cautions Before Use for other purposes. Required Tools Screwdriver (1) This is a stand for a speaker system. (6) If the stand becomes dirty, clean it by lightly wiping with a soft cloth having a neutral cleaning solution on it. Do not use a substance like thinner or benzene. Included Parts 1 3 4 2 5 Assembly 1 Remove tripod (small) from 307 speaker Remove the nut, spring washer and washer, and then separate the 307 speaker from the tripod (small). 2 Assemble post and tripod (large) Slip the post onto the tripod (large) and fasten with screws having attached washers (M4 x 10mm). [. . . ] retighten the nuts (marked with 4 Routing speaker wire Route the speaker wire through the wiring holes in the joint and post, and then connect the wire ends to the speaker. Specifications Dimensions and Weight [. . . ]