User manual ECLIPSE 316SW

[. . . ] Retain instructions The safety and operating instructions should be retained for future reference. Warnings All warnings on the unit and in the operating instructions should be adhered to. Power supply Power supply should be operated only from the power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. 6. General care of unit Do not open or modify the unit as fire or electric shock may result. [. . . ] Power cord Only use the power cord supplied and do not bend, twist, modify it for repair, or pin it under the unit. Heavy objects, heat or tension may also damage the power cord and cause fire or electric shock. When disconnecting the power cord from an outlet, do not pull the cord. Do not place the power cord near heating equipment and do not use the unit. If the plug fits loosely in an electric outlet or the plug or cord is hot. If the cord is damaged replace it as continued use may result in fire or electric shock. Unit plug Insert the plug into an outlet all the may to its 12. 13. 14. 15. 16. base. Incomplete insertion can cause heat production, and dust build-up can cause fire. Do not connect the unit to an outlet where the connection is loose even when the plug is inserted all the way to its base. If dust or metal accumulates on or near the prongs of the plug, wipe the plug with a dry cloth after disconnection. Danger signs If you notice a strange noise, smoke, unusual odour or other abnormal condition, shut off the unit, disconnect the power cord from the outlet and have the unit inspected. Electric storms During electrical storms disconnect the unit and avoid contact with the antenna and power cord. Internal temperature rise To avoid internal temperature rise when installing the unit, leave space between the unit and walls or other equipments. When installed in a rack or similar fixture, leave a 10cm (4") or larger gap on top and at sides since internal temperature rise can result in fire. The unit is provided with ventilation holes to prevent internal temperature rise. Note the following: Do not place the unit in a poorly ventilated area Do not place the unit on carpeting or on bedding Do not obstruct the ventilation holes Do not tilt the unit or turn upside down Extended non-use If the unit is likely to be unused for an extended period, shut off power and disconnect from power supply. Volume Adjustment If abnormal noise is produced during play at high volume, reduce the volume level. Before switching 17. 18. 19. 20. 21. 22. power supply on, set the amplifier volume to minimum. Connecting TV/other audio equipment When connecting a TV or other audio equipment, always shut off power, read the operating manual for each device and follow the instructions for connection. Use of non-designated cables or extension cables can cause heat production, burns, and fire. Have the interior of the unit cleaned approximately once a year by qualified personnel. Accumulated dust inside and long intervals without cleaning can cause fire or malfunction. [. . . ] (The power indicator will change from blue to red. ) When an input sinal is received once more, the power will turn back on automatically. (The power indicator will change from red to blue. ) If this unit is used for signals at extremely low volumes, set this switch to OFF to prevent incorrect operation. Phase select switch This switch is used to select the speaker phase. The ambience of the sound being listened to may change when the position of this switch is changed. The effects will change depending on the main speaker combination being used and on the setting-up environment, so listen to the sound being played back and select the switch setting that provides the most natural playback. [. . . ]