User manual ECLIPSE 307PA

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION (for customers who concerned) TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT. 1. 2. 3. 4. 5. Read instructions All safety and operating instructions should be read before operating unit. Follow instructions All operating and other instructions should be followed. Retain instructions The safety and operating instructions should be retained for future reference. Warnings All warnings on the unit and in the operating instructions should be adhered to. [. . . ] When disconnecting the power cord from an outlet, do not pull the cord. Do not place the power cord near heating equipment and 11. 12. 13. 14. do not use the unit. If the plug fits loosely in an electric outlet or the plug or cord is hot. If the cord is damaged replace it as continued use may result in fire or electric shock. Incomplete insertion can cause heat production, and dust build-up can cause fire. Do not connect the unit to an outlet where the connection is loose even when the plug is inserted all the way to its base. If dust or metal accumulates on or near the prongs of the plug, wipe the plug with a dry cloth after disconnection. Danger signs If you notice a strange noise, smoke, unusual odour or other abnormal condition, shut off the unit, disconnect the power cord from the outlet and have the unit inspected. Electric storms During electrical storms disconnect the unit and avoid contact with the antenna and power cord. Internal temperature rise To avoid internal temperature rise when installing the unit, leave space between the unit and walls or other equipments. When installed in a rack or similar fixture, leave a 10cm (4") or larger gap on top and at sides since internal temperature rise can result in fire. The unit is provided with ventilation holes to prevent internal temperature rise. Note the following: Do not place the unit in a poorly ventilated area Do not place the unit on carpeting or on bedding Do not obstruct the ventilation holes Do not tilt the unit or turn upside down ENGLISH 4 15. AC Adapter Only use the AC adapter supplied and ensure that you use it in a well-ventilated location free from dampness. Extended non-use If the unit is likely to be unused for an extended period, shut off power and disconnect from power supply. Volume Adjustment If abnormal noise is produced during play at high volume, reduce the volume level. Before switching power supply on, set the amplifier volume to minimum. Connecting TV/other audio equipment When connecting a TV or other audio equipment, always shut off power, read the operating manual for each device and follow the instructions for connection. Use of non-designated cables or extension cables can cause heat production, burns, and fire. Have the interior of the unit cleaned approximately once a year by qualified personnel. Accumulated dust inside and long intervals without cleaning can cause fire or malfunction. Before cleaning this product make sure that the power is turned off and the power cord is disconnected from the wall outlet. [. . . ] If the speaker is installed in an inappropriate place or by using an inappropriate installation method, it may fall down. Installing to a ceiling Flat-tipped screwdriver Tripod Screw (M4) Groove Installing to a wall 2 Installing the rubber spacer 1. Push the rubber spacer into the groove of the speaker starting from the notch in the speaker. Rubber spacer Tripod Screw(M4) Caution Groove Rubber spacer Attaching the "TIME DOMAIN" logo sticker Attach the "TIME DOMAIN" logo sticker to the speaker. [. . . ]