User manual EBENCH 2202 PROJECTION CLOCK

[. . . ] To avoid burn and other injuries: · Place the appliance in an open and well-ventilated area so that heat pockets cannot be created within it. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. ⷠChildren should be supervised to ensure that they do not play with the appliance. [. . . ] 7 mm When using a 3 V mains adaptor, a battery must be inserted into the compartment "CLOCK USE". ⷠPosition the projection clock such that the projection lens q is directed onto an empty surface. only Model KH 2202: · Fold out the stand-up support 2). Connect the external mains adaptor This appliance can be operated with an external mains adaptor. Please use only mains adaptors that meet these specifications: Rated voltage: DC 3V (+/- 5%) Rated current : min. 7 mm Attention: Make certain that the polarity is correct ­ both for the batteries as well as for the mains adaptor. To switch on, turn the volume controller VOLUME / BUZZ g, until an audible »Click« is heard. Using the volume controller VOLUME / BUZZ g now set the desired volume. To switch off, turn the volume controller VOLUME / BUZZ g until an audible »Click« is heard (KH 2201. If you try to turn the telescope aerial w, the aerial mounting will be damaged. As soon as you have found a position with good reception from your desired radio station, leave the telescope aerial w in this position. Release the button HOUR i, as soon as the desired hours setting is shown in the Display t. Release the button MIN a, as soon as the desired minutes setting is shown in the Display t. Release the button HOUR i, as soon as the desired hours setting is shown in the Display t. Release the button MIN a, as soon as the desired minutes setting is shown in the Display t. Place the switch l ALARM On/Off to "OFF" to completely switch off the alarm function. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please make contact by telephone with our service department. The warranty covers only claims for material and maufacturing defects, not for wearing parts or for damage to fragile components, e. [. . . ]