User manual DYSON DC25 ALLERGY

[. . . ] Unplug from outlet when not in use, and before performing user maintenance, connecting or disconnecting the hose or changing accessories. If that happens, it must be switched off, unplugged and allowed to cool down before attempting to check filters or for blockages. Put the vacuum cleaner away after use with the cable coiled safely, to prevent tripping hazards. Do not pull or carry by cable, use cable as a handle, close a door on cable, or pull cable around sharp edges or corners. [. . . ] After cleaning, push the vacuum cleaner into an upright position and stabiliser wheels will automatically drop. When returning to the upright position, ensure that the stabiliser wheels are fully engaged before releasing the vacuum cleaner. Do not press the cyclone release button while carrying the vacuum cleaner or it could fall and cause injury. PLEASE NOTE: Fine dust such as plaster or flour should only be vacuumed in very small amounts. Consult your flooring manufacturer's recommended instructions before vacuuming and caring for your flooring, rugs and carpets. If this is the case, we recommend vacuuming in hard floors mode and consulting with your flooring manufacturer. ) If used in a garage when car cleaning, care should be taken to wipe the soleplate and wheels with a dry cloth after vacuuming to clean off any sand, dirt, or pebbles which could damage delicate floors. A sample of this product has been tested and found to be in conformity with the following European Directives: 2006/95/EC Low voltage Directive, 2004/108/EC EMC Directive, 93/68/EEC CE Marking Directive. On the product or on its packaging indicates that this product should not be The symbol treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment ­ this may be your local civic amenity site or a facility provided by the retailer selling the product or a replacement product. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and for human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact the Dyson Customer Care Helpline, your local authority civic amenity site or the retailer selling the product or a replacement product. The brushbar will always default to `ON' (spinning) each time you switch on the vacuum cleaner and recline it for cleaning. If the brushbar stops during use, please refer to the `Clearing brushbar obstructions' section. For hard floors), recline the vacuum cleaner and turn it `ON', then press the brushbar `ON/OFF' button ­ the brushbar will stop spinning. Powerful suction can cause the hose to `pull back' ­ please take care. To avoid personal injury and to prevent the vacuum cleaner from falling when cleaning stairs, do not work with the vacuum cleaner above you on the stairs. Switch `OFF' and unplug the vacuum cleaner before emptying the clear binTM. Empty as soon as the dirt reaches the level of the MAX mark ­ do not overfill. To remove the clear binTM from the vacuum cleaner press the button at rear of carrying handle. [. . . ] PLEASE NOTE: Clearing blockages is not covered by your vacuum cleaner's limited guarantee. If any part of your vacuum cleaner becomes blocked, it may overheat and then automatically shut off. Ikke plasser clear binTM i oppvaskmaskinen Når du støvsuger, kan enkelte tepper genere statisk elektrisitet i clear binTM. NOTE BEM: Não use o aspirador sem ter o clear binTM na devida posição. [. . . ]