User manual DYNASTY SPAS CLASSIC DUAL PUMP

[. . . ] SC-MP-DY5 / Dual-Pump System The Quick Reference Card provides a quick overview of your spa's main functions and the operations accessible with your digital control pad. Starting Pump 1 & Pump 2: Press Pumps once to turn pump 1 on at low speed. A built-in timer automatically turns pumps off after 20 minutes (Pump 1 low speed after 2 hours), unless manually deactivated first. The "Pump 1" indicator flashes when Pump 1 is on at low speed. [. . . ] The temperature setting will be displayed for 5 seconds to confirm your new selection. The "Set Point" indicator displays the desired temperature, NOT the current water temperature!Water temperature can be adjusted by 1° increments from 59 to 104°F (15 to 40°C). LED Light Option: If spa has an optional LED light, press Light key to turn LED lights on. The LEDs will go off with the first press, then back on in the next setting with the second press. If the LEDs remain off for more than 5 sec. , the color/ display sequence will reset and start back at the beginning the next time the Light key is pressed. Color/ display sequences are: 1· LEDs light up and slowly cycle through all six colors. 8· LEDs light up for 2 sec. , flash off, then flash on in the next color until all six colors have been displayed. A built-in timer turns lights off after 2 hours unless manually deactivated first. The "Light" icon is displayed when LED light is on. Temperature display unit: Press and hold Light key for 5 seconds to display water temperature in either Fahrenheit (°F) or Celsius (°C). If a power-up occurs, system returns to default setting (°F). Quick Reference Card Automatic water heater start: When water temperature is 1°F (0. 5°C) lower than the Set Point, the heater will automatically turn on until water temperature reaches Set Point plus 1°F (0. 5°C). It flashes when there is a request for more heat but the heater has not yet started. N. B. : If your system is configured in Low Current Mode, the heater will not start if a pump is on at high speed. Economy mode: Press Econo key to switch from Normal mode to Economy mode. In Economy mode, system maintains temperature at the desired Set Point during filter cycles only. Set Point is 20°F (11°C) below the Normal mode Set Point for the rest of the time. [. . . ] Our Smart Winter Mode protects your spa from the cold by automatically turning pumps on for one minute several times a day to prevent water from freezing in pipes. The system will reset automatically when water temperature reaches 109°F (43°C). Press any key to reset the system, then reprogram all desired parameters. 3 flashing dots are displayed. ·E QU IPP ITH GECKO'S EX ED W CLU Smart Winter Mode TM SIV E· 9919-100495-B [. . . ]