User manual DYMO LETRATAG QX50

[. . . ] Remove the batteries if the unit is to remain unused for an extended period of time. Feature indicators include: CAPS Characters are typed as capital letters Rl lQ- Fixed length is activated B The label will be print in BIG FONT ABC The label will be printed in a certain type of box STYLE The label will print with the style selected 123 Number lock ABC The text will be underlined If an incorrect key sequence is pressed, the display will flash. When turning the unit on, a DYMO welcome screen will be displayed for a few seconds. [. . . ] Press the key + Q to move to the beginning of the buffer or + R to move to the end of the buffer. The labels will remain in the memory buffer, even if the unit is turned off. If you try to type when the memory buffer is full, the message ERROR 4 will be displayed. Delete part or all of the text in the buffer in order to store a new label in the memory. This feature allows you to review all the text/labels stored in the extended memory. Use the H or P arrows on the Navigation Key to set the desired number of copies (1-9). Once you have entered the correct number of copies press and the labels will print the text. The labels will print in one continuous label with a vertical chain mark to indicate where to manually cut the labels. The labelmaker default setting is English with additional international character sets that can be accessed by selecting a different language. The selection of a language defines which diacritical characters (see next section), measurement setting and currency symbols can be accessed. For example, if Spanish is selected then the diacritical characters for Spanish will be available first with the measurements in millimeters and the currency pesos. Diacritical Characters/Accented Characters Many diacritical marks (accented characters) and extra characters relevant to a specific language setting are stored and can be accessed by selecting a language. Once a specific language set is selected, the diacritical and extra characters are accessed for the specific language as follows: If the key is tapped repeatedly within a short time, you can scroll through a list of all the diacritical characters for that letter. Additional blank label tape (1/2 inch or 12mm) will exit from the unit when the Key and the Key are pressed. Once the cursor is under the desired symbol, press to enter it into text. As an example, pressing "E" repeatedly in the French-language selection will scroll through e ­ è ­ é ­ ê ­ ë. [. . . ] You can also scroll manually through the label using the Q or R arrows on the Navigation Key. If you want to edit the label, use the navigation Key to move the cursor through the text to the place you want, then type or delete. Problem Error 1 Tape jammed or low battery Error 2 Big Font cannot be selected with characters in memory Error 3 Big Font cannot be selected with style/box/ underline/2 line or lower case Error 4 Memory buffer is full Error 5 Text is bigger than defined length Error 6 2 line cannot be selected with the format Display Blinks The cursor cannot move further to the left or right No display No response from keys Solution Remove cassette to clear the tape jam Replace batteries Select another format Delete some or all of the buffer text Choose a longer label length Select another format Wrong key pressed in editing mode Wrong key pressed in menu Check that machine is on Check batteries and replace Remove batteries and re-insert after a short period of time. [. . . ]