User manual DURACRAFT DA5030
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DURACRAFT DA5030. We hope that this DURACRAFT DA5030 user guide will be useful to you.
Manual abstract: user guide DURACRAFT DA5030
Detailed instructions for use are in the User's Guide.
[. . . ] Do not use any product with a damaged cord or plug of if product malfunctions, is dropped or damaged in any manner. Do not run power cord under carpets & do not cover with throw rugs. Do not operate the Air Cleaner near a humidifier or in a bathroom or laundry area. [. . . ] Use Filter-Change Calendars to keep track of filter replacement cycle for both filters. NOTE: Filters are not washable.
STEP 3:
· Make sure that speed control is set to the OFF position. Plug in Air Cleaner.
CLEAN ING
NOTE: Prior to any cleaning operation, the Air Cleaner must be turned off and unplugged from the wall outlet. Clean all external surfaces especially the air intake grills and the air outlet area.
STEP 4:
OPERA TION
STEP 1:
· Inspect Air Cleaner upon removal from its container. Remove and discard any packaging material.
· Set speed control and IONIZER control (for Models DA-5020 & DA-5030 only) to desired settings.
Step 4
IONIZER
STEP 2:
· Place the air cleaner on a flat, level, unobstructed surface.
SUP ER OFF
HIG H SILE NT
2
POWER
STEP 5:
· Replace Pre-filter once every 3 months. Replace HEPA filter once every 2
E L E C T R I C A L R AT I N G S
This product is rated at 120 Volts A. C. , 60 Hz with a power consumption of 135 Watts. The ionization voltage is 7500 Volts D. C.
CARTRIDGE REPLACEMENT
FILTER CARTRIDGE REPLACEMENT
NOTE: Neither the prefilter nor the HEPA filter are washable. Step 2: To open, gently
from the internal chamber.
Step 5: Locate the seam
Step 7
of the pre-filter and carefully separate the fastener on the seam from the prefilter and remove the prefilter from the HEPA filter.
Step 5
place the air cleaner on its side and unscrew the locking handle under its base to release the BASE from the air cleaner.
Step 2
IF REPLACING ONLY THE PRE-FILTER, SKIP TO STEP 7. Step 7: Remove any packaging or plastic from the new pre-filter and remove any additional fasteners from the box. Secure approximately 1/2 inch of the strap fastener to one
edge of the carbon pre-filter (on the white side). Carefully wrap the pre-filter around the HEPA filter so that the ends meet and the white side is facing outwards. Close the product by replacing the base and tightening the locking handle. Step 9: Turn the air cleaner upright, plug into wall socket and turn on.
Unit
HEPA Filter with Pre-Filter
Base Locking Handle
Step 3: Remove the
BASE assembly.
Step 4: Remove the filter
assembly (consisting of the HEPA and pre-filter)
CARTRIDGE REPLACEMENT cont.
FILTER REPLACEMENT REMINDER
Filter Change Schedule: Pre-Filter: 3 Months HEPA Filter: 2 Years · Upon start up of your air cleaner and upon every Pre-filter replacement, roll the Pre-Filter 3 Month Filter- Change Calendar ahead 3 months to indicate when the next filter replacement is necessary (Fig. 1).
MAY 8-14
the right) to indicate when filter replacement is necessary (fig. 1
· Upon start up of your air cleaner and upon every HEPA filter replacement, roll the HEPA Filter-Change Calendar ahead 2 years (use the month wheel on the left and the year wheel on
DA-5010 HEPA Filter
DA-5020 HEPA Filter
DA-5030 HEPA Filter
LIMITED WARRANTY DA-5010, DA-5020, DA-5030
D U R A C R A F T ® H E PA AIR CLEANING SYSTEM MODEL SERIES DA-5010/ DA-5020/DA-5030
This product has been engineered and crafted with great care for your satisfaction. Be sure to fill out and return the enclosed card within 7 days of purchase. This 3 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. [. . . ] Return defective product to the following address with a brief description of the problem. Include proof-of-purchase and a $10. 00 check or money order for handling, return packing and shipping charges. Mark carton "Attention Repair Department. " Ship to: Repairs Department 4755 Southpoint Drive Southpoint Distribution Center Memphis, TN 38118 U. S. A. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DURACRAFT DA5030
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DURACRAFT DA5030 will begin.