User manual DUNE HD SMART H1

[. . . ] Flexible support for Dolby TrueHD and DTS HD Master Audio: output as bitstream or decode to LPCM for flexibility when connecting audio equipment. video output flexibility: output video in any resolution and format (from SD to 1080p , 24p/PAL/NTSC). Upscaling: high quality upscaling of DVD and any other SD video content to Full HD (1080p) or other HD resolution. File browser: convenient file browser with powerful file management (copy, move, delete, rename, organize, sort). [. . . ] Use the RC buttons "LEFT", "RIGHT", "UP", "DOWN", "ENTER", "RETURN" to navigate through the player menu. use the "POP UP MENU" RC button to show the list of available commands. Use the "INFO" RC button to show the information about the selected item. The "MODE" RC button allows quick setting of video output mode without entering the player setup menu. This way of video output configuration may be required if you see no picture on the screen after connecting your player to a TV. Press the "MODE" RC button and then one of the RC buttons "1", "2", "3", "4", or "5" to switch to one of the following video output modes respectively: 1. HDMI, 1080i, 60 Hz After you see a picture on the TV, press the "ENTER" RC button, and then go to the player setup menu to perform a more precise configuration of the video output mode if needed. NOTE: The procedure of quick setting of video output mode can not be used during playback. To ensure this procedure can be used, switch the player off, then switch the player on, and the wait about 1 minute to ensure the player loading is finished. 5" SATA HDD, ensure you are on the main screen of the player menu, open the HDD rack door, insert the HDD into the HDD rack and close the HDD rack door. The player will recognize the internal HDD, and will show an item corresponding to the internal HDD on the main screen of the player menu. Do not eject the internal HDD when some write operation is in progress. It is recommended to use "green" HDD models with small RPM value, small heat emission, and small power consumption; for more information, please see here: http://dune-hd. To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive to an USB port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB drive on the main screen. When connecting a USB drive requiring significant power (such as USB HDD), use an external power supply for the USB drive. Power provided by the USB ports of the player may not be enough for correct functioning of the USB drive. Do not disconnect or switch off the USB drive when some write operation is in progress. To insert an SD memory card, ensure you are on the main screen of the player menu and insert the memory card into the SD card slot of the player. The player will recognize the memory card, and will show an item corresponding to the memory card on the main screen. Some SD memory cards may not be recognized by the player or may work incorrectly; in such a case, use other models of SD memory cards. Do not eject the SD memory card when some write operation is in progress. [. . . ] Per connettere il player con installato un HDD interno tramite l'USB Slave, spegni il player, connetti la porta USB Slave del player a una porta USB del PC e poi accendi il player. Dopo aver utilizzato il player col PC, assicurati che la periferica USB sia correttamente rimossa dal pc ("Rimozione Sicura Hardware" o funzioni simili), spegni il player e poi disconnetti la porta USB Slave. Per formattare l'HDD collegato al player, seleziona l'icona corrispondente al disco nel menu principale del player, premi il tasto "INFO" sul telecomando e seleziona "Formatta Disco" (per formattare l'intero disco) o "Formatta Partizione" (per formattare una sola partizione già esistente sul disco). Il player formatterà il disco utilizzando il file system "EXT2"NOTA: per usare dischi formattati dal player su un PC con Windows, avrai bisogno di installare software appositi come "EXT2FSD" (http://www. [. . . ]