User manual DUAL XNBP

[. . . ] Dual recommends that you seek installation by a qualified auto sound technician. Before installation, please follow the following rules: 1. Be sure to carefully read and understand the instructions before attempting to install the product. For safety, disconnect the negative lead from the battery prior to beginning the installation. For easier assembly, we recommend that if additional wiring is required, that you run all wires prior to mounting your speaker in place. [. . . ] Use tie downs and wire clamps to prevent the wires from getting caught or shorted. We do not recommend placing or installing band pass enclosures where they might be subjected to moisture. Failure to maintain correct polarity will not provide the needed DC power needed to illuminate the lighting elements. Do not connect an amp or any audio output source to the lighting (Illuminite) inputs. Speaker wire should be isolated from the vehicle's electrical system to avoid noise being picked up by the amplifiers. Speaker wire should be large enough to carry the full power of your amplifier. Listening to loud music for extended periods can possibly damage your hearing! 4 XNBP SERIES INSTALLATION IlluminiteTM Lighting Hook-Up Recommendations The illuminite lighting elements of your XiNBP series products provide y ou with a unique custom touch to your vehicle. Dual 's patent pending illuminite bulb system and control circuitry provides an extraordinary Blue-Hue illumination which allows great creative opportunities for the beginner and seasoned custom installer alike. The lighting features of all illuminite products require a 12 volt power source to operate. The first is labeled audio input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and -) indicators for each set of inputs also appear on these labels. Do not connect Amplifier or any audio source to illuminite lighting inputs. directly to your battery permanently, as if will cause your battery to discharge. Correct connection would be the positive (+) 12 volt wire to the Positive (+) illuminite lighting input terminal and connect the negative (-) illuminite lighting input terminal to a good chassis ground. Fig 1a Lighting Hook-Up From Rear 12 volt DC source Audio Input Terminals Illuminite Lighting Input Terminals Head unit Ground Notice: The XiNBP series illumination elements are not removable. There are no serviceable parts inside or attached to the speaker assembly. Removal or tampering with any part or portion of the speaker and/or its assemblies will damage the product and void the limited warranty. [. . . ] Replacement products are warranted for the balance of the original warranty period. This warranty is extended to the original retail purchaser for products purchased and used in the U. S. A. , in the 48 contiguous states ONLY. This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. [. . . ]