User manual DTK COMPUTER

[. . . ] To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, carefully observe the following instruction. Unplug and contact our technical service when the following situations occur - Power cord or plug damaged - Liquid or water spill on the equipment - Liquid has penetrated into the equipment - The equipment has dropped and damaged - The product cannot work properly even following this manual 4. [. . . ] With specific regard to the laser, the equipment complies with laser product performance standards set by government agencies as a Class 1 laser product as shown by label. This Getting Started Guide provides setup instructions to help you quickly get started using your new computer. This guide provide information and instructions about - Identify your new computer - Connect your computer - Setting up your computer - Using your computer for the first time - Identify Your New Computer The following sections will help you locate and identify the connectors and components on your DTK Computer's front and rear panels. The following table provides illustration of the peripherals icons located on the rear panel of your DTK Computer. Connecting Peripherals Now you are ready to setup your computer and connect the following peripherals. Plug the monitor cable, which has a blue color connector into the blue color monitor port as shown in the Figure 3. After you have connected all the peripherals: keyboard, mouse, monitor and speaker, connect the AC power supply to the power outlet on the wall. Mouse, monitor, keyboard) and connected your computer and monitor to AC power, you are ready to power up the system. If you are unsure about this, please refer to the monitor manual for more information. If you are unsure about this, please refer to the speaker manual for more information. [. . . ] Send PC or peripherals for service through logistics or couriers to the following address. Bring in PC or peripherals for service by yourself to the following address. [. . . ]