User manual DREAMGEAR QUICK SHOT PRO

[. . . ] Sound products come with a limited warranty and have been subjected to a thorough series of tests to ensure the highest level of dependability and compatibility. It is unlikely that you will experience any problem, but if a defect should become apparent during the use of this product, dreamGEAR warrants to the original consumer purchaser that this product will be free from defects in material and workmanship for a period of 120 days from the date of your original purchase. [. . . ] NOTE: dreamGEAR will not process any defective claims without a Return Authorization Number. Unscrew the battery compartment door (located on the bottom of the QUICK SHOT PRO handle) using a mini-screwdriver (not included). Insert 2 "AAA" batteries (not included) in the correct +/- direction and close the battery compartment door. NOTE: The power switch located next to the battery compartment turns the blue LED & rumble functions of the QUICK SHOT PRO ON and OFF. HOW TO INSERT THE WII REMOTE INTO THE QUICK SHOT PRO: NOTE: The QUICK SHOT PRO is only compatible with the Wii Remote when inserted in the Wii Remote Jacket. please refer to the Wii Remote's User's Guide on how to install and uninstall the Wii Remote Jacket. NOTE: There is a pass-through port located on the front of the QUICK SHOT PRO that can be used to easily navigate through menus without having to remove the Wii Remote. Insert the Wii Remote (with the Wii Remote Jacket attached) by sliding it into the Wii Remote cradle of the QUICK SHOT PRO (directional pad end first with the buttons facing upward) until it stops. If you are playing a game that does not require the Nunchuk, you are ready to play. Make sure the connector cover of the Wii MotionPLUS has been removed and insert the connector plug of the Nunchuk into the External Extension Connector of the Wii MotionPLUS. [. . . ] If the Nunchuk is attached to the Wii Remote or the Wii MotionPLUS, remove the Nunchuk first before trying to remove the Wii Remote from the QUICK SHOT PRO. Open both latches located on the top of the QUICK SHOT PRO and lift the Wii Remote up from the back and slide the Wii Remote until it is completely out of the QUICK SHOT PRO. [. . . ]