User manual DREAM MULTIMEDIA DREAMBOX DM 500-T

[. . . ] Dreambox DM 500-S/C/T Bedienungsanleitung Digitaler Satellitenempfänger zum Empfang von freien und verschlüsselten DVB-Programmen. Kommunikations-Schnittstelle Smartcard Leser Linux OS User Manual Digital satellite receiver for free and encrypted Digital Video Broadcasting (DVB). Communication-Port Smartcard Reader Linux OS Bedienungsanleitung Dreambox DM 7025 deutsch User Manual Dreambox DM 500 english 1. Table of contents 1. Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Navigate to the option "Setup" and press the OK-Button to select. Navigate to the option "Service Searching" and press the OK-Button. Navigate to the option "Automatic Transponder Scan" and press the OK-Button. This option is primarily used for only scanning a single satellite in your list. Please select the option "Automatic Multisat Scan" if you want to scan for services on all set satellites at once. See section Automatic Multisat Scan for details. Select one of the two satellites in the drop down menu and press the OK-Button. 47 User Manual Dreambox DM 500 english You now should see that a valid transponder has been found and the checkboxes in front of "LOCK" and "SYNC" should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) only Free: If you check the checkbox in front of the "only Free" option, your Dreambox will search on for FTA (nonencrypted) services. No circular polarization: If you scan anything other than a C-Band satellite please check the checkbox. After you started searching you will see the progress bar and the estimated remaining time. You can always abort the searching by pressing the Exit-Button several times. Once your Dreambox is done searching you will see this menu on the right. Press the OK-Button to close this menu. 48 User Manual Dreambox DM 500 english You will now be prompted if you want to scan another satellite. Press the green Options-Button if that is the case and you have setup another satellite in the satellite list. You are taken back to the "Service searching" menu. 49 User Manual Dreambox DM 500 english 27. Automatic multisat scan (DM 500-S) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option "Setup" and press the OK-Button to select. Navigate to the option "Service Searching" and press the OK-Button. Navigate to the option "Automatic Multisat Scan" and press the OK-Button. This option will scan all satellites in your satellite list without asking you if you want to scan any other satellites. The transponder scan menu for a multisat scan will pop up. Pressing the OK-Button will change the scan option of the selected satellite. The options "nothing" means that the satellite is not scanned for any transponders. 50 User Manual Dreambox DM 500 english Pressing the OK-Button will toggle between the available scan options. Setting the multisat scan option to "all" will scan for all available services no matter if they are free or encrypted. . Pressing the OK-Button will toggle between the available scan options. Setting the multisat scan option to "only free" will scan for all available services that are not encrypted. Pressing the OK-Button will toggle between the available scan options. Press the green Options-Button to start the scan. 51 User Manual Dreambox DM 500 english The menu for the first scanned satellite is depicted on the left. The menu for the second scanned satellite is depicted on the left. Once your Dreambox is done searching you will see this menu on the right. Press the OK-Button to close this menu. 52 User Manual Dreambox DM 500 english The System will now ask you, if you want to scan any other transponders. You are taken back to the "Service searching" menu. 53 User Manual Dreambox DM 500 english 28. Manual transponder scan (DM 500-S) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option "Setup" and press the OK-Button to select. Navigate to the option "Service Searching" and press the OK-Button. Navigate to the option "Manual Transponder Scan" and press the OK-Button. First choose the satellite you want to scan on with the OK-Button. Enter the transponder frequency with the Numeric Keypad on your remote control. [. . . ] Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. [. . . ]