User manual DREAM MULTIMEDIA DM8000 HD PVR DVD

[. . . ] -1- Instruction Manual Digital satellite receiver for free and encrypted Digital Video Broadcasting (DVB) with optional digital recording capability. TWIN HDTV Ethernet-Port 10/100 MBit prepared for WiFi (slot and antenna) internal MiniPCI socket internal harddisk connector prepared for internal DVD-Drive TWIN DVB-S2 Tuner 2 x Plug&Play Tuner slots 2 x Smartcard Reader 4 x Common Interface 3 x USB2. 0 SD-Card-Reader CF-Card-Reader DVI/YPbPr/S-Video/2 x Scart contrasty OLED Linux OS -2- Table of contents 1. 6 1. 3 Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. 3. 1 Explanation front panel. . . . . . . . . . . . . . . 22 4. 3 Changing channels using the service list 22 4. 4 Controlling the volume. . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Sleep timer action: Select "Deep Standby" to completely turn off you Dreambox or "Standby" to put it into standby mode. Ask before shutdown: If this option is set to "Yes" a safety window will appear once the sleep timer is executed asking you if you really want to turn off your Dreambox. Press the yellow Options-Button to toggle this option. Once you have set all options to your liking press the OK-Button to save your settings. A short note will tell you that the sleep timer has been activated. 11. Setup 11. 1 Language If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option "Setup" and press the OK-Button to select. 1. Navigate to the option "Language. . . " and press the OK-Button. Select your desired and language with the Navigation-Buttons up and down. The Exit-Button will quit this menu. -49- 11. 2 Customize If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option "Setup" and press the OK-Button to select. 1. Navigate to the option "Customize. . . " and press the OK-Button. Setup modes: Therearethreedifferentusermodes:Simple, IntermediateandExpert. This gives you the possibility to set the level of options to your needs. We will not explain the expert mode in detail in this manual. Simple mode: Margin before record (minutes): Set the desired forerun in minutes for a recording. Show blinking clock in display during recording: Select wether you want the time in the OLED-Display to blink during a recording or not. Infobar timeout: Set the desired time after which you want the Infobar to disappear. Intermediate mode: These settings supplement the settings in simple mode. -50- Recordings always have priority: If this option is set to "Yes" your Dreambox will automatically switch to the service which is supposed to be recorded incase there is a conflict with an existing timer. If you set this option to "No" you will be asked if you want to switch to the service which is supposed to be recorded. Show positioner movement: If you own a satellite dish with a positioner you can see a flashing symbol of a satellite dish on your screen if you set this option to "yes". Enable multi bouquets: Set this option to "Yes" if you want to use multiple bouquets. Change bouquets in quickzap: If this option is set to "Yes" you will automatically be taken to the next bouquet while changing channels once you have reached the end of one bouquet. Alternative radio mode: Set this option to "Yes" if you want the handling in the Radio mode to be the same as in the TV mode. Action on long powerbutton press: Set your desired option what is supposed to happen if you push the Power-Button for a few seconds. The possible options are "show shutdown menu" and "immediate shutdown". 11. 3 Setting the time zone If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. [. . . ] For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. [. . . ]