User manual DLO TRANSDOCK CLASSIC QUICK START GUIDE

[. . . ] Other features include four programmable presets, controllable LCD backlight, Aux-In jack, Line-Out port, and power control. Insert the flat side of the Charger Arm into the back of TransDock Classic and turn it 90 degrees clockwise to lock the Charger Arm into place. Do not use the included Extension Arm until you have determined that you'll need it to fit TransDock Classic into your car. TransDock Classic fits in most cars with just the shorter Charger Arm. [. . . ] NOTE: You can also visit www. dlo. com/openFM to find the best FM frequencies in your area. To find an empty frequency using IntelliTune: 1. To activate the IntelliTune feature, press TransDock Classic's side buttons simultaneously. TransDock Classic's LCD screen will flash as it searches for the optimal frequency. Once the search is complete, TransDock Classic's LCD screen will display the optimal frequency in your area. Then, tune your FM radio to that station and begin enjoying your iPod music over your car stereo. 8 | DLO TRANSDOCK CLASSIC USER MANUAL |9 TransDockClassic_manual_GM2_080311:Layout 1 3/11/08 11:10 AM Page 10 Features + Settings Setting Preset Stations TransDock Classic comes with four preset stations. Using the Tuning Buttons, tune TransDock Classic to the station that you'd like to save as a preset. Press and hold the Preset Button on the right side of TransDock Classic for a few seconds to save that station as a preset channel. The screen on TransDock Classic will flash the preset channel you just set (e. g. , CHO1). NOTE : Your new preset will override whatever preset was last saved on that channel. Controlling the LCD Backlight TransDock Classic features an indigo blue backlit LCD screen. The backlight comes on automatically when you power up TransDock Classic, and any time you change frequencies. You can also manually operate the backlight by pressing the Backlight Button on the left side of TransDock Classic. If the backlight is already on, pressing this button will immediately turn it off. If the backlight is off, pressing this button will turn the backlight on indefinitely. TransDock Classic Intelligent Power Control TransDock Classic features Intelligent Power Control, meaning TransDock Classic turns on automatically when you plug it in or when you connect your iPod, and automatically shuts off when not in use for two minutes. This feature is ideal for cars whose auto power outlet continues to draw power, even when the car is off. TransDock Classic will turn itself off ­ protecting your car's battery. NOTE: TransDock Classic will not turn off as long as a player or device is attached. To manually power down TransDock Classic, hold the Backlight Button down for several seconds. This will completely turn off TransDock Classic until you manually turn it on again or it automatically turns on as described above. To manually turn TransDock Classic back on, press and hold the Backlight Button for three seconds. Getting the Best Sound Quality · Use IntelliTune to automatically find the optimal frequency to broadcast your iPod over your car's FM radio. [. . . ] In order to be eligible for this warranty, you MUST register your purchase at www. dlo. com/register within thirty (30) days of purchasing this product. If you believe that this product is defective in materials or workmanship, please e-mail customerservice@dlo. com with a brief description of the problem, for further instructions. No DLO reseller, agent or employee is authorized to make any modification, extension, or addition to this warranty. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state, or country. [. . . ]