User manual DIRT DEVIL REBEL75 HFC DD7275-1

[. . . ] 3 Information on power supply The appliance is operated with electrical power, which means there is always a risk of electric shock. Therefore, please comply with the following:  Never immerse the appliance in water or other liquids; keep it away from rain and moisture. Do not operate the appliance outdoors or in rooms with a high level of humidity. ς Take care that the power cord is not kinked, pinched, or rolled over and ensure it does not come into contact with heat sources. [. . . ] 2 - 10) depending on what type of surface you want to vacuum: - Furniture brush (Fig. 6) for non-sensitive upholstery, runner, mats, and the like - Floor nozzle with switch position as in Fig. Only attach the appliance parts when the appliance is not connected to the power supply. Otherwise the machine might start up and parts of your body, hair or pieces of clothing might be sucked in. CAUTION: Before assembling, make sure that the fitted nozzle suits the surface to be cleaned. Any floors or objects with a brush with rotating bristles that you would not clean without a second thought with a conventional brush. NOTE: You might have to twist the parts when connecting them so they are securely in place. Especially when vacuum-cleaning stairs make sure that you always stand on a higher level than the appliance. CAUTION: Only use the appliance with all filters undamaged, dry and correctly fitted. Make sure that no objects obstruct the telescopic tube, the suction hose or other openings. With the auxiliary air regulator you can quickly reduce the suction power, to release objects (such as curtains) that have been sucked in. 10) has become stuck to the floor, you can reduce the suction power just as easily using the bypass vent (Fig. If the red marking shows retract the cord by pressing the retraction button ( ) to pull in the cord up to the yellow mark (Fig. After vacuuming, switch off the appliance ( ) and wind up the power cord ( ). When winding up the cord keep the plug in your hand so that the cord does not thrash about, possibly injuring you. Keep the appliance and accessories cool and dry and so that it does not take up too much space (Fig. CAUTION: If you intend to store the appliance for a long period, first replace the dust filter bag with a new one,  1 3 Maintenance and care Changing the dust filter bag NOTE: Be careful when removing the dust filter bag so that no dust escapes. CAUTION: Switch off the appliance before changing the dust filter bag. 21 22 23 Recommendation 24 25 We recommend: Swirl Y50 MicroPor Plus dust filter bags with AirSpace Long Power Guarantee click!26 NOTE: As soon as the dust filter bag change indicator lights up (Fig. In addition, change the dust filter bag at least every three months and before storing for a long period or sending the appliance. Swirl, AirSpace MicroPor and Y50 are registered trade marks of a company of the Melitta group and used with their permission. [. . . ] Before contacting us or even sending the appliance to us, use the table to check whether you can correct the problem yourself. Problem The cleaning results are unsatisfactory in spite of the appliance working correctly. Collar brush of the floor nozzle is in a position inappropriate to the floor (Fig. Adjust the position of the collar brush to the floor via the switch on the floor nozzle (Fig. [. . . ]