User manual DIRT DEVIL M 319

[. . . ] 1 Overview Thank you for buying the universal steam cleaner ‘AquaClean’ and for your confidence in us. Your new ‘AquaClean’ is a versatile steam cleaner that will help you do a great many household jobs quickly and effectively. Depending on field of use you can also optionally add disinfectant to the hot steam if this is included in the scope of delivery or if you have acquired it from us separately. 1): 1 2 3 4 5 6 7 8 9 Release catch of the accessory compartment window Accessory compartment with three storage points Mains control light Steam ready indicator On/off switch Steam power control Steam hose connection nozzle on the appliance Accessory compartment with four storage points Release catch of the accessory compartment window Technical data Type of appliance Model name Model number Voltage Power Steam availability : : : : : : Universal steam cleaner Universal steam cleaner AquaClean M319 (-0/-1/. [. . . ] Always fill the water tank carefully using a refilling container and a funnel. Fill the water tank by emptying the refilling container into the funnel (Fig. If there was already water in the tank, the tank is certainly full enough now. Always make sure that the disinfectant is inaccessible to children, particularly just after filling the disinfectant tank and before steam cleaning. If you do not have any original disinfectant available, simply leave the disinfectant tank empty. Pour in the undiluted disinfectant carefully into the disinfectant tank no higher than just under the filling nozzle (Fig. If this happens, pull the mains plug and refill the water tank ZChapter 3. ATTENTION: Before connecting the appliance to the power supply, make sure that the voltage stated on the type plate matches the voltage of your plug socket. ATTENTION: Before starting cleaning, check whether the surface to be cleaned is suitable for steam cleaning. Always follow the cleaning recommendations of the material manufacturers. The steam cleaner is definitely not suitable for use on uncoated wooden floors, soft plastics and polished furniture. Otherwise there will be increased danger of damaging the surface to be cleaned. NOTE: NOTE: It is recommended to first sweep or vacuum-clean floors to remove loose dirt before using the steam cleaner on them. Although the appliance is fitted with overheating protection, running it without water would shorten the appliance’s service life. Otherwise, the increased humidity after cleaning could, in the worst case, cause the formation of mould. Preferably operate the steam cleaner on warm days when the air can absorb more moisture without condensation. - Only if the steam produced is no longer sufficient, should you release the steam button and wait so the device can reaccumulate pressure and produce hot steam again. - To save steam and energy, it is advisable to adjust the force of the steam using the steam power control according to the cleaning task (Fig. Always point the steam jet downwards towards the surface to be cleaned. When interrupting your work, always switch off the appliance and use up any remaining steam. When interrupting work to fill the tank or to change attachments also pull the plug from the mains socket and engage the child safety device by pushing it up (Fig. Always be especially careful when cleaning smooth floors as well as steps and stairs! [. . . ] Before sending the appliance to Royal Appliance Customer Services, use the following table to check whether you can solve the problem yourself. Problem Steam ready indicator is not on after switching on or goes out just after switching on Possible cause Solution The overheating protection device has tripped due to an empty water tank. Disconnect power cord from mains, release the last reserves of steam, let the appliance cool for about thirty minutes and fill the water tank (ZChapter 3. Water tank cap cannot be opened after you have pulled the plug, discharged the remaining steam, and have allowed it to cool for at least 30 minutes. [. . . ]