User manual DIRT DEVIL DDC1800

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DIRT DEVIL DDC1800. We hope that this DIRT DEVIL DDC1800 user guide will be useful to you.


DIRT DEVIL DDC1800 : Download the complete user guide (852 Ko)

Manual abstract: user guide DIRT DEVIL DDC1800

Detailed instructions for use are in the User's Guide.

[. . . ] The Turbine Powerhead moves easily and does not require downward pressure for thorough cleaning. SAFETY PRECAUTIONS As with any tool with moving parts, caution must be exercised while using this Turbine Powerhead. Keep hair, hands and feet away from rotating brush while the Turbine Powerhead is running. [. . . ] Remember that Turbine Powerheads operate whenever they are connected to a running vacuum. If children are present, make sure to turn vacuum system off when leaving Powerhead unit unattended. Do not attempt to service or unclog Turbine Powerhead while unit is running. Page 1 p/n 8429 1/06 Use & Care of Your Turbine Powerhead (A) ATTACHING THE TURBINE POWERHEAD To attach your metal wand, simply insert wand into Powerhead neck until it fits snugly. The built-in, locking mechanism will prevent the wand from coming loose. To detach wand, depress wand release tab on back of neck with foot or hand and twist wand free. Inserting the Wand Push here to Release Wand The wand can be locked in an upright position by pushing it forward until the lock is engaged. This locked position is convenient for storage and lifting the Powerhead. To release wand from the vertical locked position, gently place foot on Powerhead, grasp wand and pull back. Page 2 Use & Care of Your Turbine Powerhead (B) OPERATING PROCEDURES Your Turbine Powerhead runs off the airflow of your vacuum system. Slide the brush/belt assembly back into the housing recesses so the supports seat properly into the housing. NOTE: The brush will rotate in the wrong direction if the belt is twisted incorrectly. Replace belt cover. Baseplate Shaft 11. Lift Rollerbrush and Belt straight up to remove Proper Belt Orientation Position Belt between these two Flanges Page 5 TROUBLESHOOTING THE TURBINE POWERHEAD CAUTION: Moving parts—disconnect from vacuum system before servicing unit. Use the chart below to troubleshoot common problems you may experience with your turbine powerhead. If you cannot solve the problem using the solutions below, please contact your distributor or dealer for service. OTHER REPAIRS For repairs or service beyond those described in this manual, please contact your servicing distributor or dealer. warrants that the turbine powerhead when used for household purposes, pursuant to Seller’s instructions, will be free from defects in materials and workmanship for a period of three(3) years from the date of the initial consumer purchase. [. . . ] warrants that the turbine powerhead when used for household purposes, pursuant to Seller’s instructions, will be free from defects in materials and workmanship for a period of three(3) years from the date of the initial consumer purchase. warrants that the turbine powerhead, when used in a commercial application pursuant to Seller’s instructions, will be free from defects in materials and workmanship for a period of ninety (90) days from the date of the initial consumer purchase. This warranty is limited to the replacement of defective parts and any costs of shipping shall be incurred by the purchaser. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DIRT DEVIL DDC1800




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DIRT DEVIL DDC1800 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.