User manual DICOTA BLUESTAR

[. . . ] CAUTION: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. Battery cover button Mouse wheel LED Battery cover Green LED is ON Charging Green LED is OFF Battery charging completed Red LED is blinking Paired link low in battery Red LED is blinking once Turn the switch ON Installing the batteries Step 1: Press the button on the mouse and pull the battery cover backwards. Charging the battery Please charge at least 10 hours for the first time usage and charge at least 6 hours when battery runs low. Note: The charging time varies on different power output offered by USB port of your Notebook or PC. [. . . ] Click "Don't use a passkey", and then click "Next". You can find the Bluetooth mouse in the "Devices" tab when it is connected. The red LED will turn off automatically when the paring is successfully done. Note: Once the BlueStar mouse is installed, you can either disconnect the a wired mouse or leave it connected. ) Disconnecting BlueStar mouse from your computer If you would like to disconnect your BlueStar mouse, just open the Bluetooth devices control panel and delete the pairing for the mouse. How to use the wheel Your mouse has a wheel that functions both as a wheel for windows scrolling and also as a customized button. It can be used as a standard mouse button, click (press down) the wheel. Mouse does not work upon installation or is not detected Try one or more of the following: · Make sure you have installed the batteries correctly and turn the switch on. The screen cursor does not move properly If your screen cursor lags behind the movement, then your Bluetooth connection may not be able to transmit all of the data from the mouse with the necessary speed. This may be caused by interference from other radio sources, obstructions in the radio wave path, excessive distance from the Notebook or PC, or a combination of the above. Try the following actions to improve your Bluetooth connection and optimize your BlueStar mouse performance: · Remove any metallic objects from the line of sight between your Notebook or PC and BlueStar mouse. ⷠIf you are using a Notebook or PC with a built-in Bluetooth antenna, try re-orienting the Notebook or PC until you get a better data rate. ⷠIf you are using an external Bluetooth device, use a USB extension cable and place the Bluetooth adapter onto your desktop or somewhere in sight of your BlueStar mouse. ⷠDisconnect any Bluetooth audio devices, such as headsets, that may be connected to your Notebook or PC. 4 GHz radio spectrum , such as Wi-Fi network , mobile telephones , etc. Caution: It may sometimes interfere the sensor of the mouse, if your tabletop surface is in red color, transparent as glass or highly Try to use a mouse pad or use your mouse on a different tabletop surface. Disclaimer: Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer. Customer service: If you encounter any problem with your BlueStar mouse, please contact our local subsidiary, partner or dealer, or send us your inquiry to info@dicota. [. . . ] ⷠIf you are using an external Bluetooth device, use a USB extension cable and place the Bluetooth adapter onto your desktop or somewhere in sight of your BlueStar mouse. ⷠDisconnect any Bluetooth audio devices, such as headsets, that may be connected to your Notebook or PC. 4 GHz radio spectrum , such as Wi-Fi network , mobile telephones , etc. Caution: It may sometimes interfere the sensor of the mouse, if your tabletop surface is in red color, transparent as glass or highly Try to use a mouse pad or use your mouse on a different tabletop surface. [. . . ]