User manual DICOTA BLUELIGHT BROCHURE

[. . . ] Thank you for purchasing this product, it utilises the latest in Bluetooth® and Optical technology. This creative and easy-to-use Bluetooth® Mouse will bring you a whole new wireless experience. [. . . ] ⷠPlease press "Connect" button on the back of mouse before starting the pairing. Wait until the system found the mouse, select "Mouse", click "Next". After a few seconds, click "Click here" in the pop-up program of "Confirmation Required", now you can use your mouse. Once connected, after you remove the dongle or turn off the computer, double clicking the left button will reactivate the mouse. Also, if you press the Connect Button inadvertently or some other disconnection occurs during use, please reconnect the mouse. If this is not available, please open the Bluetooth Dongle Software window, delete or disconnect the mouse (as the picture shows), then reconnect. If you are using the Widcomm Bluetooth® Software, click the right button of the mouse and select "Status", then you can check the power status of the batteries and setup alarm for shortage of battery. Make sure that the Bluetooth® function has been activated in your Notebook or PC. Double click the Bluetooth icon on the Task Bar or in the Control Panel, open the "Bluetooth Management" window, click "Add", and tick on "facility is ready for searching", click "Next". Select "Don't use a passkey", click "Next", the system will install the new device automatically. Double click the Bluetooth® icon, open the Management window, select "Bluetooth Device Discovery" in menu "My Bluetooth" or click the orange button in the middle of window. Smart power saving function When the product is not used after 3 seconds, it will be entered into idle mode. For long lasting power, it's recommended to turn off the product when it's finished to use. Disclaimer: Information in this document is subject to change without notice. [. . . ] Please use the return and collection systems available in your country for the disposal. For a better transmission distance, avoid using this device on a metal surface. [. . . ]