User manual DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440. We hope that this DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440 user guide will be useful to you.

DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440 : Download the complete user guide (108 Ko)

Manual abstract: user guide DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440

Detailed instructions for use are in the User's Guide.

 [. . . ]  [. . . ] Attach the front panel (1) to the side brackets (2) using six M4 flat washers (5),  six M4 split lock washers (4) and six M4 hex nuts (3). Adhere the foam strip to the rear support bracket (6),  centering the foam as shown in figure 2. Attach the rear support bracket (6) to the side brackets (2) using four M4 flat washers (5),  four M4 split lock washers (4) and four M4 hex nuts (3). For adequate support of the PPC,  the rear support bracket (6) shall be supported on the side rails of the rack system or by other means. 
Figure 2 Rear Support Bracket and Foam Figure 1 Rack Mount Kit

PPC is a trademark,  registered and otherwise,  of DH Instruments,  Inc.  [. . . ]  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DHI PPC2+K RACK MOUNT KIT INSTALLATION PN 400440 will begin.