User manual DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S. We hope that this DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S user guide will be useful to you.
 |
DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S : Download the complete user guide (229 Ko) |
Manual abstract: user guide DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S
Detailed instructions for use are in the User's Guide.
[. . . ] 05/20/0405/20/04
PK-mol-KF Adaptor Kits for molbloc-S®
Instruction Sheet
These adaptor kits allow the conversion of the molbloc-S ISO-KF style flange to various common types of fittings. The molbloc-S elements with the 48 mm square bodies have 16 mm ISO-KF style vacuum flange outlet fittings. [. . . ] 401996 401997 401998 DESIGNATOR PK-MOL-KF401/2SWG PK-MOL-KF403/4SWG PK-MOL-KF401SWG PK-MOL-KF401/2FNPT PK-MOL-KF253/4FNPT PK-MOL-KF251FNPT PK-MOL-KF251/2MNPT PK-MOL-KF253/4MNPT PK-MOL-KF251MNPT DESCRIPTIO N 40 mm ISO-KF x 1/2 in. 103327 103328 103329
maintains a leak free connection when the system is subjected to internal pressures above vacuum level. This connection is reusable, rotatable, and can operate leak free in vacuum applications up to 10-8 Torr, and in positive pressures of 700 kPa (100 psig). When performing a leak test of a plumbing system that contains the ISO-KF Style Vacuum Flanges, do not exceed the maximum operating pressure of the molbox: 600 kPa (87 psia) for molbox A700k; 250 kPa (36 psia) for molbox A350K.
401999
1
103330
402000
1
103331
Making and Breaking Procedure for molbloc-S ISO-KF Vacuum Flange Connection
402001
1
103332
402002
1
103333
402003
1
103334
402004
1
103252
In addition to these adaptors, the 40 mm ISO-KF kits include:
QTY 1 1 1 PART NO. 103245 103309 103246 DESCRIPTION 40 mm ISO-KF Centering ring, Viton 40 mm ISO-KF Overpressure ring 40 mm ISO-KF Clamp
Place the overpressure ring past one of the ISO-KF flanges to be mated. Place the centering ring into the groove of the ISO-KF flange on the outlet of the molbloc-S. Align the mating flange against molbloc's ISO-KF flange, and close the gap by hand. Hold the flanges together and move the overpressure ring directly over the mated flanges. If necessary loosen the thumbscrew to allow the thrust washer and wing nut to fall into position on top of the clamp. To break the fitting, hold the molbloc-S with your hand and loosen the wing nut until the clamp can be separated. [. . . ] The overpressure ring keeps the O-ring in place, and
molbloc and molbloc-S are trademarks, registered and otherwise, of DH Instruments, Inc. Document 560057b-01 040520
DH Instruments, Inc.
4765 East Beautiful Lane Phoenix AZ 85044-5318 USA
Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DHI PK-MOL-KF ADAPTOR KITS FOR MOLBLOC-S will begin.