User manual DHI PK-MOL-4VCR-8VCR-38SWG ADAPTOR KIT INSTALLATION INSTRUCTIONS

[. . . ] Calibration Solutions for Pressure and FlowTM PK-mol-4VCR-8VCR-3/8SWG Adaptor Kit Installation Instructions ADAPTOR KIT, P/N 401820, INCLUDES QTY 4 4 1 2 1 2 2 2 2 2 PART NO 102070 102912 103026 103027 103028 103029 103030 103031 103032 103040 DESCRIPTION O-ring, 2-202 Brown Viton O-ring, 2-207 Brown Viton Adaptor, 4VCR F x 8VCR F Gland, 8VCR x 3/8 in. [. . . ] Swagelok when no molstic is used. INSTRUCTIONS When Using a High Flow molstic: The high flow molstic outlet fitting is 1/2 in. Swagelok connection, use an 8VCR gland with an 8VCR male nut to connect to the molstic and connect directly to the DUT using 3/8 in. tube which leads to another device, connect the tube to the molstic using the 8VCR M x 3/8 in. SWG adaptor. · · PK-mol-4VCR-8VCR-3/8SWG Adaptor Kit Installation Instructions PROCEDURES FOR MAKING CONNECTIONS Soft O-Rings To Connect VCR Fittings: Place the O-ring securely against the sealing surface inside the female nut. Insert the male fitting and tighten by hand until resistance is felt when the O-ring begins to compress. When connecting an adaptor directly to the molbloc, hold the molbloc by hand and rotate the female nut. A wrench may be used on the nut if desired, but do not tighten beyond 1/2 turn. If more than 1/2 turn is needed to make a leak free connection, the O-ring may be damaged and should be replaced. · Always use the soft Viton O-rings provided for making VCR connections to the molbloc. The O-rings supplied for making molbloc and other VCR connections are: · Size: For 1/2 in. [. . . ] Viton is a registered trademarks of DuPont deNemours Company Document 560044 011220 DH Instruments, Inc. 4765 East Beautiful Lane Phoenix AZ 85044-5318 USA Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]