User manual DHI PK-7000-MPC1-D INTERCONNECTIONS KIT INSTALLATION INSTRUCTIONS

[. . . ] Calibration Solutions for Pressure and FlowTM PK-7000-MPC1-D Interconnections Kit Installation Instructions INTERCONNECTIONS KIT, P/N 401645, INCLUDES · · · 6 2 2 100319 100317 401459 Adaptor, 1/8 in. [. . . ] The instructions below should be repeated, once for the high side and once for the low side. See the MPC1-D Operation and Maintenance manual for a schematic of a typical system layout. · If you are using RPMs (not PG7000s) go directly to Step b. a b Remove gland, collar and plastic plug from the PG7000 TEST port. NPT male adaptor into the RPM3 TEST port using Teflon tape as a seal. PK-7000-MPC1-D Interconnections Kit a b Screw 1/8 in. To use quick connect stand for TEST connection: Install reducing union into quick connecting head. NPT female adaptor onto ends of tube from MPC1-D TEST port (Step below). Connect PG7000 or RPM3 to MPC1-D REF port by cutting a piece of 1/8 in. [. . . ] Document 560039 010509 DH Instruments, Inc. 4765 East Beautiful Lane Phoenix AZ 85044-5318 USA Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]