User manual DHI MPC1 VARIABLE VOLUME REPAIR KIT INSTALLATION INSTRUCTIONS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DHI MPC1 VARIABLE VOLUME REPAIR KIT INSTALLATION INSTRUCTIONS. We hope that this DHI MPC1 VARIABLE VOLUME REPAIR KIT INSTALLATION INSTRUCTIONS user guide will be useful to you.
 |
Manual abstract: user guide DHI MPC1 VARIABLE VOLUME REPAIR KIT INSTALLATION INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] MPC1 Variable Volume Repair Kit
Installation Instructions
MPC1 VARIABLE VOLUME REPAIR KIT, P/N 401828, INCLUDES:
QTY 2 3 3 2 1 1 1 1 PART NO 103112 103113 103114 103115 103116 103117 103118 103119 DESCRIPTION O-ring, 607A001-02 O-ring, 607X001-04 O-ring, 607X001-05 O-ring, 607X001-06 O-ring, 607X001-08 O-ring, 607X001-07 Back-up ring, 607A002-02 Back-up ring, 607X002-05
Install the retaining nut (22) and spool valve (21) into the body (6). Install valve knob (27) and check operation of the valve.
DISASSEMBLY OF THE PRESSURE VOLUME:
Remove the pressure line from the rear of the volume assembly. [. . . ] Remove the allen head screws that secure the balance valve to the body and remove the assembly. Using a 1/2 inch wrench, remove valve retaining nut (22) and the spool valve (21) from the body. Separate the spool valve (21) from the retaining nut (22) and replace the O-ring (14) on the spool valve. Remove the front packing nut (8) from the retaining nut (22) and replace the back-up ring (19), O-ring (14) and outer O-ring (13). Remove the rear packing nut (8) from the valve body (6) and replace the back-up ring (19) and the O-ring (14).
ASSEMBLY OF THE PRESSURE VOLUME:
Clean and inspect the lead screw (3). Install the actuator assembly into the body (5) and through the actuator washer (4). Apply lubrication to the threads of the lead screw (3) and insert the screw assembly into the body (5). Turn the shaft counter clockwise until the lead screw (3) is threaded into the actuator assembly (2). Replace the end cap O-ring (16) and install the end cap (7) into the body (5). Install the adjustment knob (26) and rear pressure line.
ASSEMBLY OF THE BALANCE VALVE:
Install front packing nut (8) into retaining nut (22). [. . . ] Back-up ring Retaining ring Spool valve Retaining nut, valve Piston Adjustment knob Balance valve knob
MPC1 is a trademark, registered and otherwise, of DH Instruments, Inc. Document 560060 021101
DH Instruments, Inc.
4765 East Beautiful Lane Phoenix AZ 85044-5318 USA
Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DHI MPC1 VARIABLE VOLUME REPAIR KIT INSTALLATION INSTRUCTIONS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DHI MPC1 VARIABLE VOLUME REPAIR KIT INSTALLATION INSTRUCTIONS will begin.