User manual DHI M CONNECTOR BLOC FOR RPM4 PN 401929 INSTALLATION INSTRUCTIONS

[. . . ] //mTM Connector Bloc for RPM4TM P/N 401929 Installation Instructions //m CONNECTOR BLOC, P/N 402168, INCLUDES: QTY 1 2 2 4 1 PART NO 402169 101006-Z 102464-Z 103345 560073 M3 screw M3 split washer Adapter, 1/8 in. [. . . ] Maximum working pressure is 7 MPa (1 000 psi). INSTALLATION INSTRUCTIONS Install the four 1/8 in. Remove the two Philips head screws from the extreme right and left hand corners of the RPM4 Hi and Lo Q-RPT modules (1, 3). Remove the cover of the //m connector bloc by removing the two top (5) and two lateral (4) button head socket screws. Connect the four 1/8 swage F connections of the //m connector (6) to the four 1/8 swage M adapters on the RPM4 TEST(+) and TEST(-) ports. Attach the //m connector bloc (7) to the RPM4 using the two M3 screws supplied with the kit. Install the screws in the lower right hand corners of the Q-RPT modules (1, 3). [. . . ] Document 560073 041122 DH Instruments, Inc. 4765 East Beautiful Lane Phoenix AZ 85044-5318 USA Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]