User manual DEXAPLAN TM 605

[. . . ] Install it so that it cannot get damaged and does not create a stumbling hazard. Position the pressure mat and the cover so that they do not create a stumbling hazard!Otherwise there is a danger to life and a risk of injury! Initial operation Tip !You can use the pressure mat to indicate the presence of welcome visitors (e. g. [. . . ] Use the alarm unit at temperatures of 0°C to + 40°C and the pressure mat at temperatures of -15°C to +40°C!Higher or lower temperatures may adversely affect operation. Safety instructions The following instructions are for your own safety and satisfaction when operating the TM 605 pressure mat. Please note that non-compliance with these safety instructions can lead to a serious risk of accident. Explanation of the symbols and terms used: · · · Position Position of the pressure mat Tip !Do not use a stiff carpet or doormat to cover the pressure mat, since it reacts to points of pressure. If the floor and/or the underside of the carpet or doormat is uneven, malfunctions may occur. stones or grit, since these can cause malfunctions or irreparably damage the pressure mat. Detecting people Choose the area in which the pressure mat is to detect the presence of people, e. g. Spread the pressure mat out completely on the floor/surface and smooth it out flat and even (see Fig. Cover the full surface of the entry mat with a cloth, carpet or a doormat. Pack contents 1 1 2 2 1 pressure mat (including approx. 940 cm cable) fastening screws wall plugs operating instructions Danger !sensor film) W Cable socket Danger ! · · · Do not leave small children unsupervised with the packaging material. Do not use the device in the presence of sick or disabled people or animals!Shock caused by the siren poses a danger to life and risk of injury. · KOE31_GB. indd 1-4 T 52 29. 09. 2005 18:08:57 Uhr Detecting pets (dog or cat) Choose the area in which you wish the pressure mat to detect the presence of your cat or dog, e. g. Cover the full surface of the pressure mat with a cloth or a doormat. Position the alarm unit so that your pet cannot hear the acoustic signals. You can install the alarm unit close to the pressure mat or further away from it. Position the alarm unit so that you can operate it and change the battery with ease. Position the alarm unit in its chosen location either free-standing or lying down. Do not damage any gas, electricity, water or telecommunication lines when installing the device! Mark two drill holes in a line one above the other 44 mm apart in the chosen installation position. Drill the holes and push the two wall plugs supplied with the device completely into the holes. [. . . ] Take the device to a disposal facility in your city or district after its useful life. As the consumer you are required by law (Battery Ordinance) to return all used batteries. Batteries containing harmful substances are identified with the symbols shown, indicating that their disposal in household waste is prohibited. The abbreviations for the critical heavy metals are: Cd = Cadmium, Hg = Mercury, Pb = Lead. [. . . ]