User manual DEXAPLAN SL 614 10-2006

[. . . ] They belong to this product and contain important information on setting up and handling this device. If you should have any questions or are not certain how to handle this device, please visit www. dexaplan. com on the Internet or contact your service centre. Please keep these instructions in a safe place and pass them on to anyone who uses this device. · Intended Use The light controller is designed to switch lights on and off automatically in order to make others believe you are at home, for example. [. . . ] It is important to ensure that there is sufficient safety clearance between the illuminant and other items. It is possible that when the device is fitted the clearance to combustible materials such as lampshades etc. Otherwise there is a possibility of electric shock and a danger of death!Do not insert any objects into the socket or device, as otherwise you might touch live parts!It is essential to ensure that the device does not come into contact with water or moisture. The device should only be cleaned with a dry or slightly damp cloth, keeping the bayonet cap and socket dry. GB/IE T Requirements The light controller should be used with a light socket with a bayonet socket and an appropriate illuminant which also has a bayonet cap. 3 W The following illuminants should not be used: o Lamps controlled by a dimmer switch o Lights recessed into the ceiling, flicker and glow lamps · · · · · · GB/IE KOE30_T32_Content. indd 1-2 30. 10. 2006 15:56:21 Uhr Installation (see diagram) o Before installation please turn off the light. o Insert the light controller E with the bayonet cap W into the lamp socket Q and turn in a clockwise direction. o Insert the bulb T into the socket R and turn in a clockwise direction. Troubleshooting Fault There is no confirmation, the set function does not work properly or not at all. Cause The desired function has not been activated properly. Correction - Turn the light off. - Turn on the desired function as described under , , Operation". c Danger!It is possible that when the light controller is used the distance to combustible materials such as a lamp shade etc. If the lamp shade is closed the maximum power of the bulb must be 60 W!Open lamp shade Cleaning Please ensure the following before cleaning o First of all, turn off the power supply. o Please use a dry or slightly damp cloth (that has been soaked in a mild soapy water solution if necessary) to clean the light controller. Petrol, thinning agents or similar chemical substances should not be used. o The light controller must be completely dry before you reinsert it into the lamp socket. Closed lamp shade Please also note the instructions of the lamp manufacturer. Operation After installation of the light controller you can turn the light on and off as before. Activation of the Dusk to Dawn Switch Function o Turn the light on and off and then on again quickly: The light flashes once briefly as confirmation. [. . . ] Furthermore, the guarantee is restricted to defects in material and manufacture only. The guarantee is void in the event of misuse or improper handling, the use of force or interference unless carried out by the service centre. This guarantee does not limit your statutory rights. Service Information on what to do in the event of a problem can be found on the Internet at www. dexaplan. com. [. . . ]