User manual DENON TU-1500RD

[. . . ] No naked flame sources, such as lighted candles, should be placed on the apparatus. This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste. [. . . ] The remote control unit can be used from a straight distance of approximately 7 meters from the main unit, but this distance will be shorter if there are obstacles in the way or if the remote control unit is not pointed directly at the remote sensor. The remote control unit can be operated at a horizontal angle of up to 30 degrees with respect to the remote sensor. nOTE: · It may be difficult to operate the remote control unit if the remote sensor is exposed to direct sunlight or strong artificial light. Do not press buttons on the main unit and remote control unit simultaneously. Neon signs or other devices emitting pulse-type noise nearby may result in malfunction, so keep the unit as far away from such devices as possible. For details on the functions of these parts, refer to the pages given in parentheses ( ). The muting mode is set for several seconds, after which the TU-1500RD will function normally. When pressed again, the power is set to the "standby" mode and the display turns off. When pressed while the FM band is set, the TU-1500RD searches for stations that can be received in stereo and up to 100 stations are automatically stored at the preset channels. This lights when the strength of the reception frequency is at or above a specific level. When in the tuning mode, use this knob to raise or lower the frequency. When the first FM broadcast station is found, that station is stored in the preset memory at channel "A1". Subsequent stations are automatically stored in order at preset channels A1 to A10, B1 to B10, C1 to C10, D1 to D10, E1 to E10, F1 to F10, G1 to G10, H1 to H10, I1 to I10 and J1 to J10 for a maximum of 100 stations. Channel "A1" is tuned in after the auto preset memory operation is completed. When the manual tuning mode is set, the word "AUTO" shown to the right of the frequency on the display turns off. Button to automatically switch to higher frequencies, the TUNING ª button to automatically switch to lower frequencies. Button to move to higher frequencies, the TUNING ª button to move to lower frequencies. The TUNED indicator lights and tuning stops when a frequency whose strength is at or above a specific level is tuned in. The STEREO indicator lights when a stereo broadcast is received on the FM band. Use the manual tuning mode to tune in stations whose signal is too weak to tune in using the auto tuning mode. In the manual tuning mode, the signals are forcibly set to monaural, and the STEREO indicator does not light even when receiving stereo broadcasts on the FM band. Press the SHIFT button to select the memory block and use the CHANNEL buttons to select the channel number. [. . . ] When receiving an RDS station, its programme type is displayed first. Turn the TUNING/PRESET knob to choose the "RT ON" or "RT OFF". If no TP station is found with the above operation, all the reception bands are searched. If no other TP station is found when all the frequencies are searched, "NO Programme" is displayed. [. . . ]