User manual DENON SYS-391HT

[. . . ] 2. Do not open the rear cover In order to prevent electric shock, do not open the top cover. 3. Do not place anything inside Do not place metal objects or spill liquid inside the system. Please, record and retain the Model name and serial number of your set shown on the rating label. To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus FCC INFORMATION (For US customers) 1. [. . . ] When going on vacation or leaving home for long periods of time, be sure to unplug the power cord from the power outlet. · About condensation If there is a major difference in temperature between the inside of the unit and the surroundings, condensation (dew) may form on the operating parts inside the unit, causing the unit not to operate properly. If this happens, let the unit sit for an hour or two with the power turned off and wait until there is little difference in temperature before using the unit. · Cautions on using mobile phones Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from this unit when it is in use. · Moving the unit Turn off the power and unplug the power cord from the power outlet. Next, disconnect the connection cables to other system units before moving the unit. · About care · Wipe the cabinet and control panel clean with a soft cloth. · Benzene, paint thinner or other organic solvents as well as insecticide may cause material changes and discoloration if brought into contact with the unit, and should therefore not be used. SYS-391HT can be installed in an EIA standard 19 inch rack by attaching the supplied rack mount brackets. q Remove the side panel fixing screws on SYS-391HT to take off the side panels. w Attach rack mount brackets to the SYS-391HT by using the side panel fixing screws or the supplied screws. Part names and Functions Connections q Take off side panels MI C Installing and setting up supplied software MONI TOR MASTER MA STE R / OTH BO D SEN MASTER w Attach rack mount brackets Basic operations NOTE Do not use other screws. · Hold o SHIFT and press BACK to load the file selected with the track selection knob to the preview player. Press FWD to play back or pause the preview player. Basic operations Q7 Pitch fader slider Adjusts the playback pitch. Move the knob toward the "­" direction to slow down the pitch and the "+" direction to speed up the pitch. o Shift button (SHIFT) Q0 CUE switch button and display (SAMP. ) The button switches CUE1­4/CUE5­8. · When CUE5­8 is selected, the display lights up. W5 RECORD window switch button (RECORD) · Hold o SHIFT and press this button to allocate next MIDI CHANNEL to each DECK according to the ON/OFF state of the DECK CHG. MIDI CHANNEL 16 W8 BROWSE window switch button (BROWSE) Maximizes/minimizes the browser window display. · Hold o SHIFT and press this button to allocate next MIDI CHANNEL to each DECK according to the ON/OFF state of the DECK CHG. MIDI CHANNEL 4 USB settings Q8 Parameter1 adjustment knob Adjusts the filter cut off frequency. Other functions Q9 Parameter2 adjustment knob Adjusts the filter cut off frequency. W0 Parameter1 ON/OFF switch button (PARAM. 1) Switches the filter function ON/OFF. Troubleshooting W1 Parameter2 ON/OFF switch button (PARAM. 2) Switches the filter function ON/OFF. Specifications Index System diagram 4 Top panel w Virtual DJ q w e r t y u i o Q0 q Effect adjustment knob (EFX. 1/EFX. 2/EFX. 3/EFX. 4) EFX. 1 : Selects the effect. and turn this knob to adjust the sample volume. i CUE button (CUE1/CUE2/CUE3/CUE4) You can set up to 4 CUE points in real time. The behavior differs as follows according to the ON/OFF state of the sample mode. · Press o SHIFT and then the button to delete the corresponding settings. · Hold o SHIFT and press CUE1-4 while SAMP1-4 is selected to play back the selected sample. [. . . ] BROWSE : CH 1 ­ 4 SAMPLE : CH 5 ­ 8 EFX : CH 9 ­ 12 RECORD : CH 13 ­ 16 CH1 CH2 CH3 CH4 2 The CUE corresponding to MIDI channel comes on. CUE 1 : CH 1 ­ 4 CUE 3 : CH 9 ­ 12 CUE 2 : CH 5 ­ 8 CUE 4 : CH 13 ­ 16 3 Release the SHIFT. 4 Press the CF MODE while holding the SHIFT pressed. Normal mode is retrieved from the operation mode. The CUE corresponding to the current MIDI channel flashes. · MIC LEVEL1/2, channel input source switch knob, BOOTH/SEND ASSIGN, and slide switches do not support MIDI output. · When you set the mixing mode selector switch to "INT MIX", MIDI commands are not issued from input channel 2/3. [. . . ]