User manual DENON SC-N7

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] The quality of the sound produced from the speaker is affected by the size and type of the room, as well as by the method of installation. If the bass sound is overemphasized when the speakers are installed directly on the floor, set them on concrete blocks or other hard stands. Also note that if there is a magnet or any device generating magnetic force nearby, interaction between this device and the speakers can cause the colors on the TV to become blotchy. Use a dry wiping cloth and wipe lightly to remove dirt from the cabinet and operation panel. When using chemically treated cloths, follow the precautions provided for them. Do not use benzene, thinners, or other organic solvents or insecticides on the speakers since they may cause a change in quality or color. Raising the amplifier's volume excessively and playing with distorted sound could damage the amplifier and speakers. , to prevent people from tripping over them or otherwise pulling on them accidentally, causing the speakers to fall. Afterwards, perform safety inspections at regular intervals to be sure there is no danger that the speakers will fall. DENON will not be liable for damages or accidents caused by inappropriate choice of the place of installation or improper installation procedures. [. . . ] Once connections are completed, pull gently on the speaker cables to check that they are securely connected. Anslut den vänstra kanalens högtalare till anslutningarna "L" på förstärkaren och anslut den högra kanalens högtalare till anslutningarna"R"påförstärkarenochsetillattpolariteten("+"och "­")ansluträtt. [. . . ]