User manual DENON S-81

[. . . ] PERSONAL AUDIO SYSTEM S-81 OPERATING INSTRUCTIONS ENGLISH 2 SAFETY PRECAUTIONS SAFETY INSTRUCTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. [. . . ] DIRECT: The sound is played with the tone flat. [VOLUME] Loading discs ( page 3) the low 2 To emphasizeON/OFF"bass sound: use 8 or 9 When "SDB is displayed, -1 to select "ON" or "OFF". Press <5> or [OPEN/CLOSE] to open the disc tray. ¢ To close the disc tray: Press <5> or [OPEN/CLOSE] again. NOTE: · Be sure to turn on the power when opening and closing the disc tray. Doing so will damage it. or treble sound: 2 To adjust the bass "TREBLE" level is displayed, use When "BASS" or -2 8 or 9 to adjust. volume balance: 2 To adjust the left/right displayed, use 8 or 9 to When "BALANCE" is -3 adjust. About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit · The tone is only flat when "S. DIRECT" is selected. To adjust the tone controls set a made other than "S. DIRECT". 13 ENGLISH ENGLISH Listening to radio broadcasts <FUNCTION> <1/3> 8 9 Selecting a radio station ¢ Manual tuning The reception frequency changes one step each time one of [6], [7] is pressed. 1 TUNING BAND Use <FUNCTION> or [TUNER] (FUNCTION) to select "TUNER". · The reception frequency is displayed. 1 CD AUX2 TUNER 3 AUX1 (/iPod) (iPod) 2 (Front. IN) · Noise may be produced in the sound when receiving AM broadcasts if there is a monitor or other such device nearby. If so, move the S81 and monitor as far apart as possible. [TUNER] 8 BAND [6] [SEARCH] 9 1 Can be selected when iPod CONTROL on the rear panel is switched to "iPod (FRONT)" and the included iPod cable is used. 3 Can be selected when iPod CONTROL on the rear panel is switched to "AUX1 CONTROL" or "DOCK CONTROL" and an Apple iPod Dock (sold separately) or and exclusive control Dock for iPod (ASD-1R (sold separately)) is connected. Giving a name to the currently tuned in broadcast station and presetting it · A total of 60 FM and AM broadcast stations combined can be preset. · Preset stations can be given names of up to 8 characters. [7] 2 Use BAND to select the reception band. FM AUTO FM MONO XM AM 1 Tune in the broadcast station. 2 Press [ENTER/MEMO] twice. · The name input mode is set. · The reception frequency is displayed. [ENTER/MEMO] [MENU/SET] [D, H, G, F] 3 Use [SEARCH] to tune in the station. ¢ FM station reception conditions · The "TUNED" indicator lights when a station is tuned in. D H 3 Use [D] or [H] to select the desired character. Up to 8 characters can be input. / = (space) [NUMBER] (1~9, 0/10, +10) [CLEAR] · When the reception mode is set to "FM AUTO", the "ST" indicator lights when a stereo broadcast is tuned in. · If the signal is weak and the stereo broadcast reception is not stable, set the reception band mode is set to "FM MONO". The "MONO" indicator lights. F G Use [F] or [G] to move the cursor. Press [CLEAR] to delete characters. ¢ Auto tuning [RDS] About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit If one of [6], [7] is pressed and held in, the next station is searched for automatically. D H 5 Use [D] or [H] to select the preset number, then press [MENU/SET]. · The reception frequency and reception mode are preset. To stop auto tuning Press one of [6], [7]. 14 ENGLISH ENGLISH Listening to radio broadcasts Listening to radio broadcasts ¢ To change the name of a preset station: q Call out the station whose name you want to change, then press [ENTER/MEMO] twice. w Perform step 3 under "Giving a name to the currently tuned in broadcast station and presetting it". Listening to preset broadcast stations Example: To listen to the FM station preset at preset number 3. RDS (Radio Data System) RDS (works only on the FM band) is a broadcasting service which allows station to send additional information along with the regular radio program signal. Press [3] (NUMBER). · Preset number "3" is displayed. For preset numbers 10 and on, first press [+ 10] then press [0] to [0/10]. The preset number can also be chosen using [8] or [9]. ¢ To only preset the station: q Press [ENTER/MEMO] while the station is tuned in. w Perform step 5 under "Giving a name to the currently tuned in broadcast station and presetting it". NOTE: · If a station is preset at a number where a station has already been preset, the old setting is deleted and replaced with the new setting. ¢ Program Type (PTY) PTY identifies the type of RDS program. NEWS INFORM SPORTS TALK ROCK CLS ROCK ADLT HIT SOFT RCK TOP 40 COUNTRY OLDIES SOFT News Information Sports Talk Rock Classical Rock Adult Hits Soft Rock Top 40 Country Oldies Music Soft NOSTALGA Nostalgia JAZZ CLASSICL R&B SOFT R&B Jazz Music Classical Music R&B Soft R & B ¢ About the tuning and preset modes <8> and <9> can be used both to select the reception frequency (tuning mode) and to select the preset station (preset mode). · Switching between the tuning and preset modes q To switch to the tuning mode: Press <8> while pressing BAND. <8> and <9> operate in the same way as [8] and [9]. LANGUAGE Language REL MUSC Religious Music REL TALK PERSNLTY PUBLIC COLLEGE WEATHER Religious Talk Personality Public College Weather Presetting broadcast stations automatically (Auto preset) 1 Use <FUNCTION> or [TUNER] (FUNCTION) to select "TUNER". · The reception frequency is displayed. 2 Press and hold <1/3>. [. . . ] Humming noise is heard · There is interference from signals · Connect an outdoor antenna. · S-81's XM terminal and the XM · Check that the connection are Connect-and-Play antenna is not correct. · Reposition your XM Connect-andPlay antenna. 8 10, 11 12 13 8, 10, 11, 12 Display does not light and · The power supply cord is not plugged · Plug the power supply cord into a no sound is produced into a power outlet. · There is an obstacle between the main unit and the remote control unit. [. . . ]