User manual DENON RCD-M35DAB

[. . . ] CD RECEIVER RCD-M35DAB RCD-M33 OPERATING INSTRUCTIONS NOTE ON USE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). · Do not let foreign objects in the set. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. · Unplug the power cord when not using the set for long periods of time. · Do not let insecticides, benzene, and thinner come in contact with the set. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CLASS 1 LASER PRODUCT CLASS 1 , , LASER PRODUCT * (For sets with ventilation holes) · DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN610003-2 and EN61000-3-3. [. . . ] (auto tuning) Reception frequency 3 The station is tuned in. NOTE: " NO PROGRAM " is displayed when there is no traffic information broadcast station. 4 The station is tuned in. Radio Text NOTE: If no program of the specified type is found, " NO PROGRAM " is displayed. Program Types To set the RT mode, press the TIME/ DISPLAY button on the remote control unit until "Radio Text" scrolls on the display. 1 (News) (Affairs) (Information) (Sports) (Education) (Drama) (Culture) (Science) (Varied) (Pop Music) (Rock Music) (Easy Listening) (Light Classical) (Serious Classical) (Other Music) (Weather & Meteorological) (Finance) (Children`s Programs) (Social Affairs) (Religion) (Phone In) (Travel & Touring) (Leisure & Hobby) (Jazz Music) (Country Music) (National Music) (Oldies Music) (Folk Music) (Documentary) 2 When the station currently tuned in is offering a radio text message service, the message scrolls on the display. Scrolling display · When the RT mode is turned on while an RDS radio station not offering an RT service is tuned in, "NO TEXT" is displayed on the display, then the mode automatically switches to the PS mode. · In the same way, the mode automatically switches to the PS mode when the RT service is finished. In this case, the mode automatically switches from the PS mode back to the RT mode when an RT broadcast is resumed. · The RT mode cannot be set in the AM band or for FM stations not offering RDS broadcasts. · To turn the RT mode off, press the TIME/ DISPLAY button and switch to the desired display mode. 14 10 LISTENING TO DAB (Check the connections on pages 4, 5. ) Tuning in DAB (Digital Audio Broadcasting) Presetting the station that is currently tuned in Up to 60 DAB stations can be tuned in. 1 Press the power operation switch to turn on the power. Main unit Remote control unit 1 Follow steps 1 to 6 under "Tuning in DAB (Digital Audio Broadcasting) broadcasts" to tune in the station you want to preset. 2 Press the FUNCTION or TUNER button to select TUNER mode. Main unit Remote control unit 2 Use the ENTER/MEMO button to enter the station to be preset. Remote control unit 3 Press the 2 /BAND button to select DAB. Main unit Remote control unit 3 Use 9/ 8 buttons to select the preset number at which the station is to be registered. · Preset numbers at which stations are already registered are also displayed. Be careful not to accidentally overwrite previously registered stations. 4 Press the MENU/ SET button for at least 2 seconds. Main unit Main unit Remote control unit Remote control unit 5 Use the MENU/ SET button to start automatically scanning. · Use 9/ 8 buttons to select "AUTO SCAN" (from between "AUTO SCAN" When 30 broadcast stations were Main unit and "DAB INITIALIZE"). found · When the operation is performed for the first time, scanning starts automatically. · When the MENU/SET button is pressed for over 2 seconds while in the standby mode, the "DAB SCAN AREA" menu is Remote control unit The first station is displayed, and the auto scan range can be selected tuned in. I ALL BAND II (5A ~ 13F) UK ONLY (11B ~ 12D) · When auto scanning is completed, the number of broadcast stations is displayed, then the first station is The display in this section tuned in. If "NO STATION" is displayed, check the can be changed using the antenna's connection. (See page 4. ) TIME/DISPLAY button. · <DAB INITIALIZE> is used to clear the preset values of the registered broadcast stations. (See "DAB Settings" on page 16. ) 4 Use the ENTER/MEMO button to register the station at that preset number. · Once stations are registered, they can be called out using 9/ 8 buttons. Remote control unit NOTES: The function of the +/­ button on the main unit may toggle between Tuning +/­ and Preset +/­ functions. · Pressing the ­ button while holding down the BAND button at the same time changes function of the +/­ button to Tuning +/­. ("TUNING" flashes for 5 seconds. ) · Pressing the + button while holding down the BAND button at the same time changes the function of the +/­ button to Preset +/­. ("PRESET" flashes for 5 seconds. ) · The +/­ button is factory preset to function as a Tuning +/­ button. 6 Main unit Remote control unit 15 Switching the DAB information display DAB Settings 1 Follow steps 1 to 6 under "Tuning in DAB (Digital Audio Broadcasting)" on page 15 to tune in a DAB station. Use the DAB/RDS button to make the DAB settings. Remote control unit Use the TIME/DISPLAY button to switch the DAB reception information on the bottom line of the display. The display switches as follows each time the TIME/DISPLAY button is pressed: qTuning Aid Remote control unit The reception sensitivity of the frequency that is currently tuned in is displayed. Use this as a guide when installing the antenna. Use 9/8 buttons to change the reception frequency. [. . . ] · The RCD-M35DAB/RCD-M33 is only compatible with MP3 ID3-Tag Version 1. x. · The time may not be displayed properly when manual searching is performed during variable bit rate playback. · Not compatible with switching of the time display using the TIME/ DISPLAY button. · For files for which title and artist names are recorded, the title and artist names can be displayed in the play or pause mode by pressing the TIME/ DISPLAY button on the remote control unit. [. . . ]