User manual DENON DVD-A1UD

[. . . ] GraphicalUserInterface b Button illustrations used in this manual for operation explanation are for the Remote Control Unit. You can operate the unit using the button of the same name on the front panel of the unit. b Die in diesem Handbuch verwendeten Tasten-Illustrationen für die Betriebserklärung beziehen sich auf die Fernbedienung. Sie können das Gerät mit der gleichnamigen Taste an der Frontkonsole des Gerätes bedienen. [. . . ] n Operating the DVD-A1UD via the TV's remote control. (When the TV's remote control has player operation buttons) On the GUI menu, set "HDMI Setup" ­ "HDMI Control" (vpage 26). b The HDMI control function will work only on one of the 2 HDMI output terminals on the DVD-A1UD. Setup 2 Use Angle 2/3 to select angle. 2 Turn the power on for all the equipment connected by HDMI cable. 3 Set the HDMI control function for all equipment connected by HDMI cable. Playback HDMI Control Function Information On the GUI menu, set the DVD-A1UD with "HDMI Setup" ­ "HDMI Control" (vpage 26). 3 Press NOTE NOTE The setup screen disappears. . Angle changing may be restricted, depending on the disc. Changing the Brightness of the Display (Dimmer Control) Press The display brightness each time the button is pressed. . · The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. · Some functions may not operate depending on the connected TV or AV Amp. · When "Other Setup" ­ "Power Saving" on the GUI menu is set to "Power Saving Standby" or "Normal Standby" (vpage 32), the player's power cannot be turned on using the HDMI control function. · When "HDMI Setup" ­ "HDMI Control" ­ "Power Off Control" on the GUI menu is set to "Off" (vpage 26), the DVD-A1UD is not set to standby even if the connected device is in the standby mode. · When "DENON LINK Setup" ­ "DENON LINK Mode" on the GUI menu is set to "4th", the HDMI control function is enabled for the connected devices. b Please refer to the owner's manual as regards setting of connected devices. b Carry out Steps 2 and 3 should any of the equipment be unplugged. ensure that DVD-A1UD's 4 To projected onthethe TV screen, HDMI video output is change the input function of the TV and AV Amp. to that 5 When you turn the TV's powerandstandby, check goes the power of the DVD-A1UD AV Amp also on standby. Troubleshooting Normal Dim Dark Off If the HDMI control function does not operate properly, check the following points. · Is the TV or AV Amp compatible with the HDMI control function?· Is the setting of the DVD-A1UD's HDMI output terminal correct?(Step 1) · Are the HDMI control function settings of all equipment correct?(Step 3) · After setting, did you add another HDMI device connection or make any changes in the connections?In this case, perform setting again. Specifications Even when "Off" is selected, the status of operations that are performed appears momentarily on the display if "Display Setup" ­ "Temporary Display" on the GUI menu is set to "On" (vpage 32). ENGLISH Other Information About DENON LINK DENON LINK is a unique digital, balanced transfer type interface developed by DENON. It offers high speed, high quality transfer of digital audio data with low signal loss. It can be used together with DENON AV Amp equipped with a special DENON LINK connector using a single cable to enable playback with high sound quality. It allows digital transfer of the 192 kHz/24 bit 2-channel digital signals of DVD-Audio discs, PCM multi-channel signals, etc. Full-spec digital transfer of the audio contents of Super Audio CD is possible by connecting a player equipped for DENON LINK 3rd Edition. During processing of DENON LINK, the DENON LINK indicator of the display lights. DENON LINK 4th uses the clock of the AV Amp connected by DENON LINK to achieve HDMI signal transfer with little jitter when playing BD. Getting Started Connections Setup Playback HDMI Control Function Playback HDMI Control Function Information Troubleshooting Specifications Trademark Information This product uses the following technologies: "Blu-ray Disc" trademarks. and " " are is a trademark of the DVD Format / Logo licensing Corporation. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ®, HDCD®, High Definition Compatible Digital® and Microsoft® are either registered trademarks or trademarks of Microsoft Corporation, Inc. [. . . ] Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. [. . . ]