User manual DENON DVD-A1

[. . . ] We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Unplug the power cord when not using the set for long periods of time. Do not let insecticides, benzene, and thinner come in contact with the set. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. [. . . ] DELAY TIME Use this to set the distance from the different speakers to the listening position. The type of speaker used for the front speakers, center speaker, subwoofer and surround speakers can be set. Use the 0 and 1 cursor buttons to select off, 2 seconds, 5 seconds or 10 seconds for the test tone, then output the test tone using the procedure described below. 1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time. When "DISTANCE" is selected: METERS (when the 0 cursor button is pressed): The unit of distance is set to meters ("m"). FEET (when the 1 cursor button is pressed): The unit of distance is set to feet ("ft"). When "FRONT Lch", "FRONT Rch", "CENTER", "SURROUND Lch", "SURROUND Rch", "SUBWOOFER" is selected: Use the 0 and 1 cursor buttons to set the distance from the listening position to the different speakers. The maximum difference in speaker distance for which adjustment is possible is 15 feet (4. When "DEFAULT" is selected: When "DEFAULT" is selected and the ENTER button is pressed, all the items are restored to their factory default settings. When digital connections are made with an AV amplifier, make the speaker settings on the AV amplifier. For DVD audio discs, the disc's settings are given priority, so the sound may not be produced as set with the above speaker mode setting. The volume level output from the front speakers (left and right channels), center speaker, surround speakers (left and right channels) and subwoofer can be adjusted. The volume level can be adjusted between 0 and -10 dB in steps of 1 dB. W When "DIGITAL OUT" is selected: NORMAL (Factory default) When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM or packed PCM, linear PCM signals are output. Select "NORMAL" when making digital connections to an AV amplifier with built-in Dolby Digital and DTS decoder. PCM When playing Dolby Digital/DTS bitstream signals or DVDs recorded in linear PCM or packed PCM, the signals are converted into 48 kHz/16-bit PCM (2-channel) signals and output from the digital outputs. 1 kHz / 48 kHz)" is selected: OFF (Factory default) When playing linear PCM or packed PCM DVDs that are not copyright-protected, for 2-channel PCM audio signals up to 96 kHz, linear PCM signals are output as such without being converted from the digital outputs. ) PCM signals of 48 kHz/16 bits and lower are output, regardless of whether they are copyrightprotected or not. For DVDs containing multi-channel PCM signals, the digital signals are down-mixed for output into two channels, front left and right. (Only the front left and right channels are output for sources for which down-mixing is prohibited. [. . . ] 2 Set marks at scenes you want to see again so that you can start playback from the marked position Up to five marks can be set. When "PLAYER MODE" at "OTHER SETTING" "SETUP" is set to "AUDIO", zooming is not possible the top menu or with still pictures. When "PLAYER MODE" at "OTHER SETTING" "SETUP" is set to "VIDEO", zooming is not possible the top menu. Use the 0 and 1 cursor buttons to select the marker number and press the ENTER button. [. . . ]