User manual DENON DVD-3930

[. . . ] DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-3930CI OPERATING INSTRUCTIONS ENGLISH ¢ SAFETY PRECAUTIONS SAFETY INSTRUCTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. [. . . ] AUTO: When playing 4:3 images, the picture is displayed in the center of the 16:9 TV screen with a 4:3 aspect ratio. AUTO (Upon purchase): The material type (film or video) is automatically identified from the disc and the mode is selected automatically. VIDEO2: This mode is suited for playing video material discs and 30-frame film material discs. 1 2 1 2 1 2 · No effect for interlaced video outputs. 21 ENGLISH ENGLISH Making the initial settings Making the initial settings Setting the horizontal display range Set the horizontal display range with respect to the interlaced output. Audio settings ( ) ". · The procedure for making the "SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" settings is the same as when "MULTI (LPCM)" is selected at "HDMI AUDIO SETUP" ( page 17). · When "ON" is selected for "SW+10dB" at "CHANNEL LEVEL", the volume of the sound output from the subwoofer can be set 10 dB higher. F Use [F G] to select " D 1 Use [D H] to select "PIXEL CROPPING", then press [ENTER]. D 2 Use [D H] to select the item to be set, then press [ENTER]. OFF (Upon purchase): Select this when a regular consumer TV is connected. ON: When a professional monitor is connected, select this if the image's synchronization is disturbed. Setting the audio channels Set the audio output. D 1 Use [D H] to select "AUDIO CHANNEL", then press [ENTER]. D 2 Use [D H] to select the item to be set, then press [ENTER]. MULTI CHANNEL (Upon purchase): Select this when using 3 or more speakers. The "SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" setting screens appear. ¢ About V. S. S. function lets you enjoy a surround effect with only 2 speakers (left and right). · This function is only effective for DVDs recorded in Dolby Digital, DTS, MPEG, LPCM with 2 or more channels. · For some discs the effect may be weak or there may be no effect at all. · For some discs the sound may be distorted when using this function. · Cancel other surround functions (for example, the TV's surround mode) when using this function. · The effect is stronger if the listening position is approximately 3 to 4 times the distance of the space between the front speakers (or the sideways width of the TV when using the TV's speakers). 1 2 2CH (VSS OFF): Select this when using 2 speakers and a Dolby Pro Logic decoder (Dolby Pro Logic compatible amplifier). 2CH (VSS1 ON): This setting provides a natural surround effect in a system with 2 speakers connected. 2CH (VSS2 ON): This settings provides a stronger surround effect in a system with 2 speakers connected than VSS1. 1 2 22 ENGLISH ENGLISH Making the initial settings Making the initial settings Setting the digital output Use this procedure to set the signal format of the digital audio output. Setting the downsampling Use this procedure to set the digital audio output when playing DVDs recorded in linear PCM or packed PCM. Setting the source direct Set this to output the disc's audio information as such without making the "AUDIO CHANNEL", "SPEAKER SETUP". With Super Audio CDs, the playback range can be restricted using this setting. D 1 Use [D H] to select "DIGITAL OUTPUT", then press 1 Use [D H] to select "DOWN SAMPLING", then D [ENTER]. D Use [D H] to select "SOURCE DIRECT", then press D 2 Use [D H] to select the item to be set, then press 2 Use [D H] to select the item to be set, then press 1 [ENTER]. D 2 Use [D H] to select the item to be set, then press [ENTER]. NORMAL (Upon purchase): Select this when an AV amplifier with built-in Dolby Digital or DTS decoder is connected to the DVD-3930CI's digital audio output terminal. When playing discs recorded in Dolby Digital or DTS, the corresponding bitstream signals are output. OFF (Upon purchase): For DVDs recorded in linear PCM or packed PCM without copyright protection, 2-channel audio signals of up to 96 kHz are output as linear PCM signals with no conversion. (192 kHz and 176. 4 kHz signals are converted to 96 kHz and 88. 2 kHz, respectively. ) OFF (Upon purchase): Select this when playing using the "SPEAKER SETUP" and "BASS ENHANCER" settings. 50kHz, 100kHz: Set this to output the disc's audio information as such without making the "SPEAKER SETUP" and "BASS ENHANCER" settings. [. . . ] Playback does not start even when the 1 button is pressed, or starts but stops immediately. Picture does not appear. Check · The angle cannot be switched unless the DVD contains more than one angle. · Check the "Viewing restriction level" setting. Page 36 Playback does not start when a title is selected. Reset all the initial setting values to the values set upon purchase. 25 Check · Plug the power supply cord into the power outlet. [. . . ]