User manual DENON DVD-1730

[. . . ] DVD VIDEO PLAYER DVD-1730 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN : CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. [. . . ] 2 Within 30 seconds, select a desired track number using the Numeric buttons. · For the disc with less than 10 tracks, press the track number directly. · For discs with 10 or more but less than 100 tracks, to play back a single-digit track, press 0 first, then the track number (e. g. · For discs with 100 or more tracks, to play back a single- or a double-digit track, press 0 first, then the track number (e. g. · Press the CLEAR button to erase the incorrect input. MODE button repeatedly during playback and the Cursor buttons (s or B) to choose a desired marker, then press the ENTER button. NOTES: · Opening the disc tray, turning off the power or selecting AC at step 2 and pressing the ENTER button will erase all Markers. · To clear a marker, using the Cursor buttons (s or B), position the cursor on to the marker number to be cleared and press the CLEAR button. · You can mark up to 10 points. Repeat · The REPEAT button is available only during playback. REPEAT TITLE / CHAPTER NOTE: · The +10 button can also bring up the track search display except for the disc with less than 10 tracks. For such a disc, track search can be done by just pressing the track number. DVD To activate Repeat function, press the REPEAT button during playback. · The repeat mode changes as described below every time you press the button. OFF (repeat off) CHAPTER TITLE (current chapter repeat) (current title repeat) By using the SKIP buttons H G During playback, press the SKIP G button to move to the next track. Press the SKIP H button to go back to the beginning of the current track. · If the SKIP H or G button is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTES: · The Repeat Title/Chapter setting will be cleared when moving to other title or chapter. · Repeat playback does not function during A-B repeat playback. · Repeat Title/Chapter is not available with some scenes. NOTE: · The SKIP H and G buttons are not available when playback is stopped. REPEAT TRACK / GROUP / ALL Time Search DVD search screen appears on the TV screen. 2 Within 30 seconds, enter a desired disc time point on the disc with the Numeric buttons. -:--:-- CD 1:23:45 CD To activate Repeat function, press the REPEAT button during playback. · The repeat mode changes as described below every time you press the button. OFF (repeat off) TRACK (current track repeat) ALL (entire disc repeat) 1 Press the SEARCH MODE button until the time · Playback will start at the specified time. · For Time Search, "0" appears automatically when there is no need to enter a number. For example, "0:0_:_ _" appears in the time search screen if the total time of the disc is less than 10 minutes. 3 Press the CLEAR button to erase an incorrect input. NOTES: · In the track repeat, the repeat setting will be cleared when moving to other track. · Repeat playback does not function during A-B repeat playback. Marker Setup Screen DVD CD OFF (repeat off) TRACK (current track repeat) MP3 JPEG WMA ALL (entire disc repeat) You can use markers to memorize your favorite places on a disc. [. . . ] 12 ­ The HDMI sound is not output when AUDIO MODE is 24 set to ANALOG. 24 No DTS sound output ­ Use a DIGITAL OUT jack when outputting the DTS sound. (Check the status of the No image from HDMI connection 14, 23 HDMI related indications. ) ­ Check whether the connected monitor equipment or other 14 equipment supports HDCP. (This player will not output a video signal unless the other equipment supports HDCP. ) ­ Check the setting of HDMI. [. . . ]