User manual DENON DRR-F100

[. . . ] Se till att det finns möjlighet till god värmeavledning vid montering i ett rack. We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Unplug the power cord when not using the set for long periods of time. Do not let insecticides, benzene, and thinner come in contact with the set. [. . . ] Check the left and right channels and be sure to interconnect them correctly (R to R, L to L). Clasping the power cords and connection cords together may result in humming or noise. After unplugging the power cord, wait at least 5 seconds before plugging it back in. The LED color changes as follows, according to the condition: · During power ON: green · C-120 and C-150 tapes C-120 and C-150 cassette tapes use extremely thin tape that can easily get caught in the capstan or pinch roller. Slack in the tape The tape may get caught on the capstan and be damaged if the tape is slack when the cassette is loaded. ) Also use this button to search for the beginning of the current selection when playing in the forward (1) direction, or to search for the beginning of the following selection when playing in the reverse (0) direction. To protect recordings from being erased accidentally, use a screwdriver, etc. To record on a cassette tape whose tabs have been broken off, cover the holes with cellophane tape, etc. ) Also use this button to search for the beginning of the following selection when playing in the forward (1 ) direction, or to search for the beginning of the current selection when playing in the reverse (0) direction. When playing a tape, set the Dolby NR mode to the same mode as when the tape was recorded. Store cassette tapes in cases with stoppers to prevent the tape from becoming slack. If a foreign object is caught in the cassette tray during closing, simply press the OPEN/CLOSE button again and the tray will open. Single-sided recording/playback mode ( ) Use this to record or play only the front or back side. Example 1: Finding the beginning of the 4th selection on side A while playing the 1st selection. Example 2: Finding the beginning of the 2nd selection on side A while playing the 4th selection. Be sure to press the stop button ( 2 ) to stop playback before turning off the power or unplugging the power cord. The music search function detects and counts the blank (non-recorded) spaces between selections. Press the fast-forward button a number of times equal to the number of blank spaces between the current position and the desired position. The music search function detects and counts the blank (non-recorded) spaces between selections. Press the rewind button a number of times equal to the number of blank spaces between the current position and the desired position. nOTE: · The music search function detects blank spaces of 4 seconds or more. 2 Operation is even easier when the components in the D-F101 series are connected to the DRR-F100 with system ) 2 The system functions will only work when the components of the D-F101 series are connected. [. . . ] To perform this operation from the system remote control unit, first turn the remote control unit's function select switch and set the function to "TAPE". 2 The editing function is set from system remote control unit (RC-927) included with the receiver (DRA-F101). The editing function will not work with discs containing more than 21 tracks. Load the cassette tape onto which you want to record into the cassette deck`s cassette tray with side A facing up before starting edited recording. [. . . ]