User manual DENON DNV755

[. . . ] NETWORK AUDIO VIDEO PLAYER DN-V755 OPERATING INSTRUCTIONS 1 CAUTION: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. FCC INFORMATION (For US customers) 1. [. . . ] 51 Audio/Video Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Picture-Only Video Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Audio-Only Formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Photo Formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 10 Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 11 After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 12 Main Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 8 1 Quick Guide to the DN-V755 This chapter provides a quick guide to the DN-V755 buttons, LEDs, connections, and accessories. Front Panel 1 POWER LED 2 Lights when the DN-V755's power is on ACCESS LED Lights or flashes while hard drive is accessed Flashes when unit is booting 5 3 STOP LED 4 Lights when STOP mode is set Flashes when unit is booting or when media is stopped but a playlist is active PLAY LED Lights during playback Flashes when unit is booting or media is paused 6 7 SELECT button Displays OSD (Selecting a Playlist) on page 41 when pressed simultaneously with PLAY/PAUSE or STOP button during playback of playlist Displays On Screen Menu when held for 3 seconds PLAY/PAUSE button In pause or stop mode, starts playback In playback mode, pauses playback Acts as enter when navigating the OSD STOP button Stops playback Goes back one level when navigating the OSD Rear Panel 1 2 3 4 5 PARALLEL INTERFACE Terminal for parallel control from an external device SERIAL INTERFACE Terminal for serial control from an external device ETHERNET terminal 10/100 BASE-T RJ-45 LAN terminal for network connection MODE SWITCH N/A COMPOSITE VIDEO OUTPUT terminal Composite Video RCA terminal 6 7 8 9 S-VIDEO OUTPUT terminal Y/C Separated Signal Output terminal AUDIO OUTPUT terminals Stereo Audio Output (left and right) RCA terminals POWER SWITCH Turns the DN-V755 on and off DC-INPUT terminal The power input terminal; connects via the AC adapter 9 Connections D-Sub Female 9-Pin RS-232 Serial Interface to connect directly to a computer using a straight-through cable Composite Video RCA terminal to connect to a video monitor equipped with a composite video input using a 75 RCA cable. If connecting to a device other than a video monitor, the device must be terminated at 75 D-Sub Female 15-Pin Parallel Interface to connect to external input trigger device 10/100 BASE-T RJ-45 LAN terminal for connection to a network using a straightthrough cable or to a nonnetworked computer using a cross-over cable S-Video (Y/C Separated Signal) Output terminal Analog audio output Accessories Before connecting and using the DN-V755, please make sure you have received all of the following accessories. 1. Operating Instructions (this manual) 10 Mounting the Feet Attach the feet to the bottom of the set at points approximately 20 mm from the edges (for both sides). Remove the protective sheets from the bottom of the feet, and press on them from the top with sufficient strength to attach them. Note If intending to install the unit(s) in a rack, do not install the feet. Turn the unit over, and then attach the feet approximately 20 mm from the corner points of the unit Mounting the DN-V755 on a Rack The DN-V755 is of 1U size, allowing it to be mounted in EIA standard 19" racks. Notes There are different mounting kits for each of the following configurations: · · Two DN-V755 units mounted in the 1U space of a 19" rack. A single DN-V755 unit mounted in the 1U space of a 19" rack. When mounting the DN-V755 on a rack, use guide rails or shelf boards, etc. , on the rack side to prevent weight from being applied to the front of the DN-V755. For example, take care to protect the DN-V755 from heat from other devices. The surrounding conditions must meet the following specifications: Operating temperature range: Operating humidity range: Storage temperature range: Storage humidity range: 5 ­ 35o C 5 ­ 85% -20 ­ 60o C 5 ­ 90% 11 Connecting the AC Adapter 1. Insert the power cord's plug into the AC adapter's AC inlet side. 3. To prevent the DC plug from being accidentally disconnected, mount the DC plug retainer clip using the included screw. 12 2 Connecting the DN-V755 to a Computer To access the user application that allows you to control your DN-V755, you must connect your unit to a computer. You can connect to a computer in any of the following ways: · · · Through a corporate network Through a home network using a router or switch Directly to a computer using an Ethernet cross-over cable In most cases, once you connect to a computer and turn the unit on, the unit is ready to use. Whether connected through a network or directly to your computer, the unit appears as an external network drive on the computer's file system in a special folder called Workgroup. The unit's default name is MediaPlayer followed by four digits, such as 1234. Note You can rename the unit, or configure network settings manually, once you have access to the application. [. . . ] Example: sclip beaches. wav When the parameter is a playlist file, do not include the filename extension. Example: slist smplPlaylist Control Commands These are commands sent to control the DN-V755. Command splay sstop spause snext Description Same as initiating PLAY from the front panel (or Now Playing screen) Same as initiating STOP from the front panel (or Now Playing screen) Same as initiating PAUSE from the front panel (or Now Playing screen) Same as holding down SELECT while pressing the STOP button on the front panel Same as holding down SELECT while pressing the PLAY/PAUSE button on the front panel plays a media file plays a playlist Parameters N/A N/A N/A N/A Response $rsplay $rsstop $rspause $rsnext sprev N/A $rsprev sclip filename ex: sclip beach. mpg slist playlistname ex: slist smplPlaylist svmute n ex: svmute 0 samute n ex: samute 0 sklock n ex: sklock 0 spin o n ex: spin 1 1 (turn AUX1 on) 1 filename = the filename of media $rsclip file with extension playlistname = the name of playlist file (without extension) n = video mute setting (0 = off; 1 = on) n = audio mute setting (0 = off; 1 = on) n = key lock setting (0 = off; 1 = on) $rslist sets video mute on or off sets audio mute on or off sets key lock on or off $rsvmute $rsamute $rsklock $rspin sets AUX1 and AUX2 parallel output o = output (1 = AUX1, 2 = AUX2) 1 pins n = setting (0 = off; 1 = on) See External Control Using the Parallel Port on page 48. 45 Request Commands These are commands sent to request data from the DN-V755. Command gcurlist gcurclip gstate gvmute gamute gklock gspace gdate gver gip gmask ggate gmac gmode gclips gclip n glists glist n What it does gets the current playlist gets the current clip gets the transport status gets the video mute setting gets the audio mute setting gets the key lock setting gets the disk space gets the system date/time gets the software version gets the network IP address gets the network mask gets the network gateway gets the MAC address/ network setting gets the network mode get number of media files gets the media filename Parameters N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Returns $rgcurlist <filename of current 1 playlist> $rgcurclip <filename of current 1 clip> $rgstate <transport status (play, 1 pause, stop, unknown)> $rgvmute <video mute setting> (0 = off; 1 = on) $rgamute <audio mute setting> (0 = off; 1 = on) $rgklock <key lock setting> (0 = off; 1 = on) $rgspace <disk space remaining in KB> $rgdate <date and time> $rgver <ROM version number> <Software version number> $rgip <ip-address> $rgmask <mask> $rggate <gateway> $rgmac <mac-address> N/A N/A n is the media 2 file number $rgmode <mode (static, dhcp, auto-ip)> $rgclips <total number of media content files> return $rgclip <associated media filename> $rglists <total number of playlist files> gets the number of playlist files N/A gets the playlist filename n is the playlist $rglist <associated playlist 3 index number filename> If the transport status changes or a new clip or playlist is selected then the appropriate serial message will automatically be generated by the DN-V755 in order to inform the controlling device. 2 3 1 Use gclips to get the total number of media files. The playlist file number range is from 0 to (glists ­ 1). 46 Serial Responses The DN-V755 responds to any command that it receives. If the command is successful, the DN-V755 sends an "acknowledge" message that begins with $r followed by the original command. [. . . ]