User manual DENON DNS3000

[. . . ] 3 MIDI Channel Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to Enter and Exit Hybrid MIDI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rane/Serato Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Loading the Serato Scratch Mapping File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 6 Loading the Serato Scratch Mapping File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 DN-S3700 Serato Scratch Mapping File Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 DN-S1200 Serato Scratch Mapping File Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Hybrid Mode Panel Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Other DENON DVS System Software Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2 Hybrid MIDI Configuration Select the DVS output control signal before you get started 1. To select other DVS DJ application control signals, push down on the Parameters knob and turn it to select, 2. 0kHz, 1. 2kHz, 3. 0kHz Fig. Push and hold the MEMO/-PRESET key for 2seconds to enter the Preset mode. You will briefly see, "Preset Mode", then "Cue Mode ­ DENON" Hybrid MIDI Sel 2. 0kHz o Select 1. 2kHz for, Torq Preset Mode Cue Mode DENON 3. Turn the flashing Parameters knob backwards until you see, "Hybrid MIDI Sel ­ Scratch Live" Hybrid MIDI Sel 1. 2kHz o Select 3. 0kHz for, MixVibes Cross Hybrid MIDI Sel 3. 0kHz 6. Push down on the parameters knob to select, then the following 3 screens are displayed. PC MODE Connecting PC MODE PC Linked PC MODE Completed! 5. While in Cue or Pause mode, push the CD/USB key, you will see, "OK" 6. Push down on the parameters knob to select and Exit Hybrid MIDI mode PC MODE Connecting PC MODE PC Linked PC MODE Completed! 5. While in Cue or Pause mode, push the Source key, you will see, "Quit PCMode ­ Cancel", then turn the parameters knob and you will see, "Quit PCMode ­ OK" 6. Push down on the parameters knob to select and Exit Hybrid MIDI mode 5 Rane/Serato Hardware Configuration DN-S3700: Connect the analog RCA Outputs from the Left and Right Decks to the Rane/Serato SL3, SL1 (TTM57SL, TTM68) Inputs. Connect a USB cable from each Deck and Rane/Serato hardware to your computer. DN-S1200: Connect the analog RCA Outputs from the Left and Right Decks to the Rane/Serato SL3, SL1 (TTM57SL, TTM68) Inputs. Connect a USB cable from each Deck and Rane/Serato hardware to your computer. OR OR In Scratch Live, uncheck the "Thru" option and select "REL" mode. *ABS is not supported. In Scratch Live, uncheck the "Thru" option and select "REL" mode. *ABS is not supported. 6 Loading the Serato Scratch Mapping File Close the Scratch Live application (if open). Take the Auto_Save. xml file provided by DENON and copy it to the appropriate Scratch Live folder shown below. [. . . ] *ABS is not supported. In Scratch Live, uncheck the "Thru" option and select "REL" mode. *ABS is not supported. 6 Loading the Serato Scratch Mapping File Close the Scratch Live application (if open). Take the Auto_Save. xml file provided by DENON and copy it to the appropriate Scratch Live folder shown below. Note: if you have mapped other devices previously and would like to save these settings, rename your current Auto_Save file "before" you copy the DENON one. [. . . ]