User manual DENON DN-V300 ADDENDUM FOR AUTO PLAY

[. . . ] (2) Continue Chapter Repeat (2) Continue Track Repeat Playback Playback (1) Playback Track No. selected at random --(2) Continue Track Repeat Playback (1) Playback Track No. 1 --(2) Continue Disc Repeat Playback (1) Playback Track No. selected at random (2) Continue Disc Repeat Playback (The playback order is random) (1) Playback Track No. 1 (1) (2) (1) (2) (1) (2) ALL (Disc) ON --- (1) (2) OFF (Resume play : OFF) (skip MENU screen) (1) Playback Main Title (*1) (1) (1) Playback Track No. selected at random OFF ON --- (2) RandomPlayback (No Repeat Playback) (Automatically PBC OFF) (1) Playback Track No. 1 in (1) Playback Track No. [. . . ] (2) After Loading, automatically (a) If Title Repeat is set Playback Chapter 1 of the memorized Title number first. (b) If Chapter Repeat is set Playback the Chapter number that the memorized Title number memorized. (3) Check memorized Title or Chapter is Repeat play-backed. NOTES Note the following points when DVD is AUTO Played. However, the Menu screen might be displayed depends on the composition of Disc and recorded information. The playback of the recorded title starts when information on Main title is recorded in Disc, if AUTOPLAY is done with Repeat Mode OFF. The playback of the recorded the longest title in Disc starts when information on Main title is not recorded in Disc, if AUTOPLAY is done with Repeat Mode OFF. The setting of AUDIO and SUBTITLE that changes during DVD playback is not memorized. However, it is likely not to playback according to SETTING of SETUP according to information recorded in Disc. VCD) * * Be sure to set "AUTOPLAY" of the SETUP screen to "ON" before executing the following procedures. Refer to the attached "OPERATING INSTRUCTIONS" for details of the operation of DN-V200/DN-V300. (The reference item in parentheses shows "OPERATING INSTRUCTIONS" item. ) Repeat playback the specified Track of CD 1 Setup Procedure (1) Load CD into DN-V200/DN-V300. (Refer to 7 LOADING DISCS of "OPERATING INSTRUCTIONS". ) (2) Start the CD playback after LOADING. * When VCD is loaded, PBC (Play Back Control) is automatically turned off and the playback starts. (Refer to 9 PLAYBACK and 13 USING THE ON-SCREEN DISPLAY of "OPERATING INSTRUCTIONS". ) (4) Set Repeat Mode to Track Repeat. (Refer to 10 PLAYING REPEATEDLY of "OPERATING INSTRUCTIONS". ) When Repeat Mode is set, the Track number while playback in progress is memorized. (5) Check the playback is begun from the beginning of the Track again when the playback of Track ends. (2) After Loading, check the memorized Track number is automatically play backed. Repeat playback all Track of CD sequentially II 1 Setup Procedure (1) Load CD into DN-V200/DN-V300. (Refer to 7 LOADING DISCS of "OPERATING INSTRUCTIONS". ) (2) Start the CD playback after LOADING. * When VCD is loaded, PBC (Play Back Control) is automatically turned off and the playback starts. (Refer to 10 PLAYING REPEATEDLY of "OPERATING INSTRUCTIONS". ) (4) Check the playback is begun from (Track 1) first again when the playback of all Track in Disc ends. (2) After Loading, check the Track 1 is automatically play backed first. [. . . ] (a) When Folder Repeat is set Repeat playback the file in ROOT Folder from Track 1 in ROOT folder in order of the file name. (c) When Disc Repeat is set Repeat playback the file in Disc from Track 1 in ROOT folder in order of the file name and order of the folder name. (2) After Loading, check playback by setting Repeat Mode as above ((a)-(c)). Repeat playback Folder of JPEG/MP3 Disc at random II 1 Setup Procedure (1) Load JPEG/MP3 Disc into DN-V200/DN-V300. [. . . ]