User manual DENON DN-F650R

[. . . ] SOLID STATE/USB RECORDER DN-F650R Owner's Manual PORTUGUS SVENSKA NEDERLANDS ESPAOL ITALIANO FRANAIS DEUTSCH ENGLISH IMPORTANT TO SAFETY WARNING: CAUTION 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] 16 Repeat Sets the file to repeat playback. A maximum of 30 marks can be written to one file. Marks can be edited using the "DMP Mark Editor" software included. On: Turns the silent skip function on. If the recording is temporarily stopped because of the silent skip function, "S. S" will flash on the display (vpage 5). 17 PowOnPlay (Power On Play) Sets the operation performed when the power to the DN-F650R is switched on when recording media is mounted. 18 KeyCtrl Off: Musical interval is changed in accordance with the playback pitch. (Key Control) On: Musical interval is not changed when the playback pitch is adjusted. Sets the musical interval when the playback pitch is adjusted. The following operation is performed according to the play mode set in "14 Play Mode". When "Single" is set, only the track currently being played is repeated. When "Random" is set, when all files have finished playing, random playback is started again in a different order. On: Files are automatically played back when the power is switched ON. 12 Setting defaults Setting Items Setting details Getting started n Renaming presets Setting Items 03 Rename Preset names can be renamed according to their use. A maximum of 8 characters can be input. 19 Auto Cue Off: Turns the auto cue function off. 48dB / 42dB / 36dB This item also sets the silent level of the silent portion at the beginning of a file. The auto cue function temporarily stops playback at the point where playback restarts after skipping the silent portion at the beginning of a file. Firstly, select the preset number that you want to rename from "01 Presets" in the menu. Setting details n Entering Characters q lace the cursor in the position where you want to insert characters P using the MARK+ and MARK buttons. n Deleting Characters q lace the cursor to the right of the character you want to delete the P MARK+ and MARK buttons. Deletes a character on the left of the cursor. Part names and functions Connections NOTE If the silent portion cannot be detected at the beginning of a file even after 20 seconds, the auto cue operation is automatically performed at the beginning of the file. StartPaus: During recording or playback, recording or playback starts when the switch of the external device is closed (short), and recording or playback is paused when the switch is opened (open). StrtPusTr: During recording, recording starts when the switch of the external device is closed (short), and paused when the switch is opened (open). Furthermore, if the switch is closed (short) again while recording is paused, the file is updated to a new file and recording restarts. Mark: During recording or playback, a mark is added when the switch of the external device is closed (short). ManualTrk: During recording, if the switch of the external device is closed (short), the file is updated to a new file and recording continues. Hot start: Sets the Hot start mode. Setting defaults 20 Remote1 Sets the DN-F650R operation to be performed when a switch control signal is received from an external device connected to Remote Terminal 1. For details on the REMOTE terminal 1, see "REMOTE terminal 1" (vpage 26). Recording 21 ParaRem (Parallel Remote) Sets the operation mode for the parallel remote function. [. . . ] GRecording mediaH Symptom Recording media (USB or SD) icon is not displayed when a recording media is connected. Cause/Solution Sometimes this unit cannot recognize a recording media because of a defective connection. This unit supports USB mass-storage class flash memory and USB external storage. Check the display and make sure that the currently selected recording media and the actual recording media that you want to use are the same. [. . . ]