User manual DENON DN-F300

[. . . ] PROFESSIONAL SOLID STATE PLAYER DN-F300 OPERATING INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN FCC INFORMATION (For US customers) 1. COMPLIANCE INFORMATION Product Name: Solid state player Model Number: DN-F300 This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. [. . . ] This product and the accessories packed together constitute the applicable product according to the WEEE directive except batteries. y Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 u CD-ROM for multi-language manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1. GENERAL INFORMATION FEATURES Containing Standard Functions for an Institutional-Use Solid-State Player Playback of music files recorded on an SD card/SDHC card (see page 7) Playback of music files recorded on various media connected to the USB jack (see page 7) Supporting WAV, MP3 (MPEG-1 Layer III) (see page 7) Displaying the ID3 tags of MP3 (see page 8) Quick Track Search with Jog Wheel (see page 9) CUE function to return to the playback starting position (see page 12) Headphones output with trim (see page 2) Microphone input with trim (one on the front panel and the other on the rear panel) (see page 2 and 3) Analog audio output with trim (see pages 2 and 3) Paging function to decrease the playback audio output level by 20 dB automatically when using a microphone (see page 13) Microphone mute function to mute the microphone input automatically when the microphone input level is -60 dBV or less (see page 13) User memory function for storing various settings when the power is turned off (see page 8 and 9) Monaural audio output function that mixes the left- and right-channels and outputs them from the L- and R-output jacks (see page 13) Advanced Playback 20% variable pitch control in 0. 1% steps (see page 12) Tempo Lock Function to Retain the Normal Pitch by Compensating the Pitch Variation by Pitch Control (see page 12) Selectable play mode (All Tracks, All Tracks in a Folder, Single Track, Random All Tracks, Random Tracks in a Folder) (see page 10) Repeat function ( A-B section setting, various play mode) (see page 11) Auto cue (auto audio level search) (see page 13) Power ON play (See page 13) Next track reserve playback (see page 12) 19-inch 1U Rack Mount IR Remote Control (Remote Controller RC-1135 Included) PART NAMES AND FUNCTIONS Front panel wry i o !2 !3 !4 !5!6 !7 @5 @6 @9 q et u !0 !1 !8 !9 @0 @1@4 @7 23 @8 @9 q POWER switch and indicator Press this button to turn the power on or off. The indicator lights when the power is turned on. w LEVEL control Use this knob to adjust the output level of the headphones. When control is finished, push the knob back in. Warning! When using headphones, take care not to turn the volume too high. Listening at high volumes for extended periods of time may result in permanent hearing damage. e PHONES jack You can connect your headphones to this jack. (Stereo phone 1/4" jack) r LEVEL control Use this knob to adjust the input level of the microphones. This knob controls the level of the microphones connected via the MIC 1 INPUT and MIC 2 INPUT jacks simultaneously. When control is finished, push the knob back in. t MIC1 INPUT jack Connect a microphone to this jack. (Monaural phone 1/4" jack, dynamic microphone) y MASTER LEVEL control Use this knob to adjust the audio output level. When control is finished, push the knob back in. 2 u Remote control sensor 1. GENERAL INFORMATION i SD slot Insert an SD card into the slot, label side upwards. @2 6 button Hold the button pressed to start playback as FF. o SD/USB input select buttons and indicators (SD: Green, USB: Amber) Press either of the buttons to select an input source. @3 NEXT TRACK button and indicator (Amber) Pre thi utt t re er e the e t tr k !0 USB connector Connect a USB device to this jack. (See page 9) @4 FOLDER/TRACK jog wheel Turn the jog wheel to skip the track or to change the menu item. Push the jog wheel to confirm the settings in menu mode. !1 Display unit !2 DISP/MENU/STORE button Press this button to change the text display mode. (See page 8) Hold the button pressed for more than 2 seconds to enter in preset menu mode. (See page 13) @5 TEMPO LOCK button and indicator (Amber) Press this button to lock the pitch of the playback sound. @6 PITCH button and indicator (Amber) Press this button to switch the PITCH control ON or OFF. !3 PLAY MODE button Press this button to select the track play mode. (See page 10) @7 PITCH BEND +/- buttons Hold the button pressed to control the playback speed. When the button is released, the original speed is resumed. !4 TIME/CLEAR button Press this button to select the time mode on the display unit. (See page 8) Press the A or B button while pressing this button to clear the A-B point or B point. @8 PITCH jog wheel Turn the jog wheel to control the playback speed. !5 A button Press this button to set the start point (A point) of the A-B REPEAT play. @9 Rack mount bracket If the unit is not mounted to a 19-inch rack, remove the brackets. !6 B button Press this button to set the end point (B point) of the A-B REPEAT play. !7 EXIT/RELOOP button EXIT: Press this button to cancel the A-B REPEAT play. RELOOP: Press this button to restart the A-B REPEAT play. Rear panel !8 9 button Press this button to stop playback. Press this button during preset menu setting to cancel input, and to enter in stop mode. z z LINE OUT x cv !9 CUE button and indicator (Amber) When this button is pressed during playback, the pickup returns to the playback start point or to the top of the reserved track if the next track has been reserved by pressing of the NEXT TRACK button. [. . . ] Power On Setting items Play Stop (Default) On Off (Default) Contents The unit starts to play after boot procedure is completed. The unit detects the playback sound of the top of the target track when the pickup returns to the playback start point after you press the CUE button during playback, and the pickup returns to the point where the playback sound starts. (See page 12) The unit does not detect the playback sound of the target track when the CUE button is pressed during playback, and the pickup returns to the playback start position. The unit automatically mutes the microphone input when microphone input level is -60 dBV or less. [. . . ]