User manual DENON AVR-700RD

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. · ÜBEREINSTIMMUNGSERKLÄRUNG Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC und 93/68/EEC. VORSICHT: Um dieses Gerät vollständig von der Stromversorgung abzutrennen, trennen Sie bitte den Netzstecker von der Wandsteckdose ab. Stellen Sie bei der Aufstellung dieses Gerätes sicher, dass die zu verwendende Wechselstrom-Steckdose leicht zugänglich ist. · DECLARATION DE CONFORMITE Nous déclarons sous notre seule responsabilité que l'appareil, auquel se réfère cette déclaration, est conforme aux standards suivants: EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3. D'après les dispositions de la Directive 73/23/EEC, 89/336/EEC et 93/68/EEC. PRECAUTION: Pour déconnecter complètement ce produit du courant secteur, débranchez la prise de la prise murale. [. . . ] This is a function for automatically correcting the standard signal level for different program sources. The correction value can be checked by pressing <STATUS>. Dial. Norm Offset -4dB (When "OPTIONS" is selected) The numbers are the correction value when corrected to the standard level. 27 ENGLISH ENGLISH Basic Operation Basic Operation ENTER SURROUND STANDARD PARAMETER Selecting the DTS NEO:6 mode It is possible to play analog input signals and digital input signals (2-channels) in the surround mode. Checking the input signals 1 Press [ON SCREEN]. Room EQ: Displays the type of equalizer currently set. FORMAT: Displays the input signal's number of channels (front / surround / LFE on/off). "SURROUND" is displayed for 2-channel signal sources recorded in Dolby Surround. FLAG: "MATRIX" is displayed if the input signal has undergone matrix processing, "DISCRETE" is displayed if the input signal has undergone discrete processing. 1 Press STANDARD to select "DTS NEO:6". DOLBY PLIIx DTS NEO:6 DHFG 2 Play a program source. 4 Press F G to select the play mode. CINEMA: This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6. 1-channel sources. MUSIC: This mode is suited mainly for playing music. 2 Press [ON SCREEN] again. · OSD-1 OSD-2 OSD-3 OSD-4 OSD-5 ~ 7 OSD-8 ~ 14 : : : : : : 5 STANDARD When "MUSIC" is selected: Press D H to select "CNTR. (0. 0 to 1. 0, default : 0. 3) Input signal HDMI monitor information Input/output settings Auto surround mode USER MODE 1 ~ 3 Tuner preset stations 1 DHFG [ON SCREEN] SURROUND PARAMETER ENTER 6 Press ENTER or SURROUND PARAMETER. 3 5 Example: Dolby Digital Example: DTS About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit (When "MUSIC" is selected) 28 ENGLISH · "OSD-1" "FLAG" is not displayed if there is no FLAG identification signal in the input signal. · OSD-2: The monitor's resolution is displayed when an HDMI monitor is connected to the AVR-700RD. · OSD-4: This is displayed when the auto surround mode is set to "ON" ( page 23) and the input mode is set to "AUTO". DELAY TIME: (MATRIX mode only) Adjust the delay time between "0 ms" and "300 ms". 4 Press ENTER or SURROUND PARAMETER. · Select "Default Yes" and press F to reset all the settings. <7CH STEREO> DHFG The 7CH STEREO mode can be selected directly by pressing <7CH STEREO>. <SURROUND BACK> 2 Press SURROUND PARAMETER. Press 3 set. D H to select the item, then press F G to EFFECT: (WIDE SCREEN mode only) Effect signals with the multi-surround speaker effects are played. When set to "OFF", the SL/ SR channels are played from the SBL/ SBR channels, respectively. LEVEL: (WIDE SCREEN mode only) Adjust the strength of effect signals "1" to "15". DSP SIMULATION DHFG SURROUND PARAMETER ENTER SB CH OUT · ON: Surround back channel played. ROOM SIZE: Adjust the imaginary size of the recreated sound field space. (Does not express size of room in which played. ) There are 5 parameters: "small", "med. s", "medium", "med. l" and "large". About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 33 ENGLISH ENGLISH Basic Operation Basic Operation <FUNCTION> CH SEL/ ENTER SURROUND PARAMETER Setting the tone control Adjust the bass and treble to suit your tastes. 2 When you do not want to adjust the tone Either press <TONE DEFEAT> or set "Tone Defeat" to "ON" at step 3 in "Adjusting the tone". 2 Adjusting the tone 1 Press SURROUND PARAMETER. 2 Press D H to select "TONE", then press F. <TONE DEFEAT> DHFG In the direct mode, "TONE" cannot be selected. Adjusting the speaker volume 1 Press CH SEL/ENTER. "SB" when surround back speaker set to "1spkr". Not displayed when "None" set. 3 Press G to select "OFF". DH 4 Pressto set to select "Bass" or "Treble", then press FG the level. Can be adjusted within the range of ­6 dB to +6 dB. [MODE] [MEMORY] [TUNER] [BAND] [SHIFT] [TUNING] [CHANNEL] 5 Press ENTER. H or CH SEL/ENTER to select the The settable speaker switches each time this button is pressed. 3 Press F G to adjust the volume. Can be adjusted within the range of ­12 dB to +12 dB. DHFG SURROUND PARAMETER CH SEL/ENTER 3 About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 34 ENGLISH ENGLISH Basic Operation Basic Operation Using the fader function With this function, the volume of all the front side speakers or all the rear side speakers can be adjusted (attenuated) at once. Listening to the radio Check that the remote control unit is set to "AMP". Preset memory 1 2 Press D H or CH SEL/ENTER to select "Fader". Press CH SEL/ENTER. Auto tuning 1 Use the "Auto tuning" or "Manual tuning" operation to tune in the station to be preset in the memory. 1 select "TUNER". Either turn <FUNCTION> or press [TUNER] to 3 Press F to attenuate the volume of all the front side speakers, G to attenuate the volume of all the rear side speakers. The fader function does not affect the subwoofer. It is possible to adjust so that the volume of the speaker whose volume is the lowest is ­12 dB. 2 Press [BAND] to select "AM" or "FM". [. . . ] · No digital signal is being input. · Connect securely. · Properly select a digital signal input source. 7 23 23 24 47 An image is not projected with an HDMI connection. · AVR-700RD's video output terminals · Check that the connections are 8, and monitor's input terminals are correct. · Set the monitor's input selector to -- the terminals to which video Nothing is displayed on signals are connected. · Player connected with component · Down-conversion is not possible -- terminal, TV connected with video for progressive video signals. [. . . ]