User manual DENON AVR-483

[. . . ] · DTS NEO:6 DTS NEO:6 lets you enjoy 2-channel analog, PCM, and Dolby Digital 2-channel sources in full 6. 1-channel surround sound. · Dolby Digital EX Dolby Digital EX, a 6-channel surround format proposed by Dolby Laboratories, was jointly developed by Dolby Laboratories and LucasFilm Ltd. to bring the dynamic wealth of Dolby Digital Surround EX into the home. [. . . ] The warm playback of 6. 1 channels which include surround back channels enables easy positioning of sound images directly behind the li stener, dramatically improving the spatial expressiveness of the surround field. · Dolby Pro Logic II With the AVR-1 083, you can use Dolby Pro Logic II to do more than just enjoy your 2-channel analog, PCM, and Dolby Digital 2-channel sources in surround sound ambiance. · Auto Surround The AVR-1 083 can automatically store the surround mode for any of four input signals: (1) Analog and PCM 2 channel, (2) Bit stream 2-channel (Dolby Digital, DTS) and (3) Bit stream multi-channel. If the type of input signal changes, the most appropriate surround mode is automatically selected for the signal. Component Video Conversion, the first time in this class · High-grade Up Conversion The AVR-483 is the first model in the mid price range to include the Video Up Conversion feature that converts video signals to component signals, letting you enjoy high picture quality from all video gear connected to the AVR-1 083. Since composite and S-video signals are also converted into component video signals and output to the monitor, all you need to do is connect a monitor that can display component video images. The AVR-483 features an equal power 7-channel amplifier section, with identical amplifier design on all 7 channels, with high current discrete output devices on all channels. Each of the 7 amplifier channels is rated at 150 watts, into 6 ohms, 1 kHz with no more than 0. 7% THD. · Finest DSP employed for faster processing in the D. D. S. C-Digital circuitry and higher sound quality · 32-bit Floating Point DSP Hammerhead Shark (MELODY100), the latest DSP from Analog Devices, is used for the decoder to further boost digital signal processing capability and also providing the highest dynamic range. Faster processing speed results in more complete surround decoding. · 24-bit, 192-kHz All-channels D/A Conversion For optimum fidelity and transparency, the AVR-483 features a total of 16 BurrBrown PCM-1791 high resolution 24-bit, 192 kHz DACs, in an eight channel differential mode configuration. Preset Memory Learning functions System Call · Newly redesigned pre-programmed remote controller with learning feature It also has a small liquid crystal display that lets you quickly identify which devices 2 Component Video Input 7 Composite Input 7 S-Video Input · Video Outputs 1 Component Video Output 3 Composite Output 3 S -Video Output 1 Multi Zone Video output frequently used keys layed out in the center and an easy-to-grip shape and size. · Power Amplifier Section Rated output Front Specifications All keys backlit Supports independent Power On and Off commands Center Surround Surround back · Support for Multi Zone Configurations · The AVR-483 provides a Multi Zone Output function and a Select function that to an additional zone, in addition to the main room. Multi-room Zone 2 can have l et you output different sources to multiple zones. Sources can be selected for output variable pre-amp output along with composite video feed. The AVR-483's Power Amplifier Assign function lets you assign the 2 Surround Back (SB L/R) amplifier Zone 2 speakers, with 150 Watts per channel output power, while still providing 5 discrete amplifier channels to drive all speakers in a 5. 1 configured home theater room. · +12 V Trigger Output (Assignable) · Preamplifier Section *THD figures are power amp stage values. 110 W + 110 W (8 ohms, 20Hz-20kHz, 0. 05 % THD) 150 W + 150 W (6 ohms, 1 kHz, 0. 7 % THD) 110 W (8 ohms, 20Hz - 20kHz, 0. 05 % THD) 150 W (6 ohms, 1 kHz, 0. 7 % THD) 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0. 05 % THD) 150 W + 150 W (6 ohms, 1 kHz, 0. 7 % THD) 110 W + 110 W (8 ohms, 20Hz-20kHz, 0. 05 % TIED) 150 W + 150 W (6 ohms, 1 kHz, 0. 7 %THD) channels when the system is not configured for 7. 1, to instead drive the Multi-room I nput sensitivity/impedance · Serial Control Port to support an AMX, Crestron integrated control system · 1 Set of 8-Channel External Analog Inputs · Other features that enhance operating ease · Audio Delay Function or outboard video processor. Audio Delay function corrects slight lags between sound and picture that can occur when a video signal is processed, such as in a Progressive Scan DVD player · FM Section 2. 5 mV/47 kohms PHONO(MM) CD, DVD, VDP, TV, DBS, VCR-1, VCR-2, V. AUX, CDR/TAPE 200 mV/47 kohms FRONT UR, CENTER, SURROUND UR, SURROUNC BACK UR, SUBWOOFER 200 mV/15 kohms Output level/Load impedance FRONT UP, CENTER, SURROUND UP, SURROUND BACK UR, SUB WOOFER MULTI ZONE UR 1. 2 V/10 kohms VCR-1, VCR-2, CDR/TAPE 200 mV/47 kohms 10 Hz - 100 kHz; +0, -3 dB Frequency response Signal-to-noise ratio 1 02 dB ± 1 dB (20 Hz - 20 kHz) RIAA deviation Tone control Treble: ± 10 dB, Bass: ± 10 dB 87. 5 - 107. 9 MHz 1. 0 pV (11. 2 dBf) 520 - 1710 kHz 1 8 pV AC 120 V, 60 Hz 7. 0 A 434 (W) x 171 (H) x 416 (D) mm 17. 1" (W) x6. 7" (H) x 16. 4" (D) 16. 5 kg, 36. 4Ibs · Variable Gain Volume S/N in the useable area has been improved. Finer adjustments are also possible in 0. 5 dB steps across the extended range of -80 dB to +18 dB. Tuning frequency range Usable sensitivity · AM Section Tuning frequency range Usable sensitivity · General The AVR-483 supports subwoofer cross-over switching with a choice of 5 cross-over performance characteristics of the subwoofer to the main speaker system. · Adjustable Cross-Over Switching frequencies: 40, 60, 80, 100, and 120 Hz. This lets you more accurately match the Power supply Power consumption Dimensions Weight · A/B switching between surround speakers ' Design and specifications are subject to change without notice. [. . . ] Finer adjustments are also possible in 0. 5 dB steps across the extended range of -80 dB to +18 dB. Tuning frequency range Usable sensitivity · AM Section Tuning frequency range Usable sensitivity · General The AVR-483 supports subwoofer cross-over switching with a choice of 5 cross-over performance characteristics of the subwoofer to the main speaker system. · Adjustable Cross-Over Switching frequencies: 40, 60, 80, 100, and 120 Hz. This lets you more accurately match the Power supply Power consumption Dimensions Weight · A/B switching between surround speakers ' Design and specifications are subject to change without notice. "Dolby "Dolby Digital", "Pro Logic II", "Dolby Digital EX" and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation. [. . . ]