User manual DENON AVR-2308

[. . . ] AV SURROUND RECEIVER AVR-2308 Owner's Manual Bedienungsanleitung Manuel de l'Utilisateur v Book 1 Book 2 English Italiano Deutsch Français PRESET CODE Español Nederlands Svenska ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA · DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 2006/95/EC, 89/336/EEC and 93/68/EEC Directive. n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: CAUTION To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: · ÜBEREINSTIMMUNGSERKLÄRUNG Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Entspricht den Verordnungen der Direktive 2006/95/EC, 89/336/EEC und 93/68/EEC. VORSICHT: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] 0dB : Set the maximum volume to 0 dB. ENGLISH Option Setup Make various other settings. s Volume Control Set the main zone volume setting. d Source Delete Remove input sources that are not used from the display. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting F Menu screen F 2. Manual Setup 1. Speaker Setup 2. HDMI Setup 3. Audio Setup 4. Zone2 Setup 5. Option Setup 2-5. Option Setup 1. Amp Assign 2. Vol. Control 3. Source Delete 4. On-Screen Display 5. Quick Select Name 6. Trigger Out 7. Remote ID Setup 8. 2Way Remote 9. Display 10. Setup Lock Volume Limit Make a setting for maximum volume. [Selectable items] ON : Use this source. [Selectable items] OFF : Do not set a maximum volume. Delete : Do not use this source. NOTE · Input sources being used in the various zones cannot be deleted. · Input sources set to "Delete" cannot be selected using the SOURCE SELECT knob on the main unit or SOURCE SELECT button on the remote control unit. ­20dB : Set the maximum volume to ­20 dB. 0dB : Set the maximum volume to 0 dB. a Amp Assign Define how the amplifier for the surround back speaker channels is used. The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the main zone) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections). Power On Level This sets the volume set when the main zone's power is turned on. [Selectable items] Last ­­­ : Use the memorized setting from the last session. in units of 1 dB. [Selectable items] 7. 1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp 2ch ­80dB ~ +18dB : Set the volume level when the power is turned on Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. For details, see "Amp Assign / Multi-zone Connections and Operations" (vpage 55 ~ 57). [Selectable items] Full : The sound is cut off entirely. ­40dB : The sound is attenuated by 40 dB. ­20dB : The sound is attenuated by 20 dB. 0 ENGLISH f On-Screen Display Make on-screen display related settings. Tuner Information This sets the time the on-screen display is displayed when an operation is performed. g Quick Select Name Change the Quick Select name. Up to 16 characters can be input. Getting Started Screensaver Make screensaver settings. When set to "ON" the screensaver is activated if there is no activity , for about 3 minutes. [Selectable items] Always : Show display continuously. @ [ \ ] (space) Connections [Selectable items] ON OFF : Activate the screensaver if there is no activity for about 3 minutes. : Turn the screensaver function off. h Trigger Out Select the conditions to turn on the trigger out with respect to the zone, input source, surround mode, etc. For details about the trigger out function, see page 18. Setup iPod Information This sets the time the on-screen display is displayed when an operation is performed. Playback Selecting the Zone Select the zone for which the trigger out is set. Text Input source and mode display. [Selectable items] Always : Show display continuously. : Turn display off. Remote Control [Selectable items] ON OFF : Turn display on. : Turn display off. Setting with Respect to the Input Source When the input source set to on is selected, the trigger out turns on. Multi-Zone Master Volume Master volume display during adjustment. Display Mode Select the on-screen display's display mode. Setting with Respect to the Surround Mode · When the surround mode set to on is selected, the trigger out turns on. · Associated with respect to surround modes that are set to "ON" . · This can be set if the "MAIN ZONE" is selected at "Selecting the Zone" . · Associated when an input source for which "Setting with Respect to the Input Source" is set to "ON" is selected. Information [Selectable items] ON OFF : Turn display on. : Turn display off. [Selectable items] Mode1 : If there is no video signal, flickering of the on-screen display is not prevented. Troubleshooting Mode2 : Prevents flickering of the on-screen display when there is no video signal. Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used. [Selectable items] ON ­­­ : Activate trigger on this mode. : Do not activate trigger on this mode. ENGLISH j Remote ID Setup Set remote control ID. l Display Adjust display brightness of the receiver. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting [Selectable items] NOTE 1 2 3 4 [Selectable items] Bright : Normal display brightness. : Display is off unless controls are operated. When using the AVR-2308 with only the included remote control unit (RC-1081), there is no need to make settings. [. . . ] · The player is connected using the component input connectors, the monitor is connected using the video (yellow) or S-Video output connectors. · The monitor is not compatible with copyright protection (HDCP). · Input source does not match recorder's video connection connector (video or S-Video). Page 11 ~ 19 Cause Countermeasure · The "Manual Setup" ­ "HDMI · Set to "TV" . [. . . ]