User manual DENON AVR-2307CI

[. . . ] AV SURROUND RECEIVER AVR-2307CI OPERATING INSTRUCTIONS ENGLISH ¢SAFETY PRECAUTIONS SAFETY INSTRUCTIONS Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. [. . . ] 2 Press D H or [CH SELECT] to select the speaker. The settable speaker switches each time this button is pressed. The SW channel level can be turned off by decreasing it one step from ­12. 0 dB. F the side Press [F 3 speakers, ] to attenuate the volume of allof allfront rear G [G] to attenuate the volume the side speakers. The fader function does not affect the subwoofer. It is possible to adjust so that the volume of the speaker whose volume is the lowest is ­12. 0 dB. 2 3 5 Press ENTER or SURROUND PARAMETER. 1 2 1 3 · "SB" when surround back speaker set to "1spkr". Not displayed when "None" set. 36 ENGLISH ENGLISH Basic Operation Basic Operation <FUNCTION> CHANNEL BAND TUNING Listening to the radio Check that the remote control unit is set to "AUDIO". Manual tuning Auto tuning 1 Use <FUNCTION> to select "TUNER" or press [TUNER]. When listening to the XM Satellite Radio ( page 38, 39). Press BAND to select "AM", "FM" or "XM". 1 Use <FUNCTION> to select "TUNER" or press 2 [TUNER]. 2 Press BAND to select "AM", "FM" or "XM". SHIFT When listening to the XM Satellite Radio ( page 38, 39). 3 Press [MODE] to set the manual tuning mode. Check that the display's "AUTO" indicator turns off. 3 Press [MODE] to set the auto tuning mode. · The "AUTO" indicator lights. 4 Press TUNING. The frequency changes continuously when the button is held in. · When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator turns off. · "AM" or "FM" can be selected directly by pressing [FM/AM]. SHIFT [FM/AM] CHANNEL 4 Press TUNING. · Automatic searching begins. [ON SCREEN] · If tuning does not stop at the desired station, use to the "Manual tuning" operation. · "AM" or "FM" can be selected directly by pressing [FM/AM]. [TUNER] TUNING [MODE] BAND [MEMORY] About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 37 ENGLISH ENGLISH Basic Operation Basic Operation Preset memory Recalling preset stations XM Satellite Radio AVR-2307CI is the XM Ready receiver. You can receive XM® Satellite Radio by connecting to the XM Passport System (sold separately) and subscribing to the XM service. 1 Use the "Auto tuning" or "Manual tuning" operation to tune in the station to be preset in the memory. 2 Press [MEMORY]. SHIFT to select the desired memory block (A to Press CHANNEL to select the desired preset channel 4 (1 to 8). 1 Press SHIFT to select the memory block. 2 Press CHANNEL to select the desired preset channel. ¢ Introducing XM Satellite Radio There's a world of audio listening pleasure beyond AM and FM. Select from over 170 channels of music, news, sports, comedy, talk, and entertainment. Questions?: Visit www. xmradio. com. 5 Press [MEMORY] again. ¢ How to Subscribe Listeners can subscribe by visiting XM on the Web at www. xmradio. com or by calling XM's Listener Care at (800) 967-2346. The Radio ID can be found by selecting channel 0 on the radio. · Store the station in the preset memory. · To preset other channels, repeat steps 2 to 5. A total of 56 broadcast stations can be preset -- 8 stations (channels 1 to 8) in each of blocks A to G. · The memory block can also be selected by pressing SHIFT. ¢ A Warning Against Reverse Engineering It is prohibited to copy, decompile, disassemble, reverse engineer, or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into human-readable form. Hardware and required $12. 95 monthly service subscription sold separately. Channel blocking is available for XM radio receivers by calling 1-800-XMRADIO. All rights reserved. Checking the preset stations Press [ON SCREEN] repeatedly until the "Tuner Preset Stations" screen appears on the on screen display. 38 ENGLISH ENGLISH Basic Operation Basic Operation Checking the XM signal strength and Radio ID TUNING FUNCTION BAND STATUS Channel selection 1 Use <FUNCTION> to select "TUNER" or press 1 Use <FUNCTION> to select "TUNER" or press [TUNER]. [. . . ] · The subwoofer's channel volume level is set to "OFF". Measures · Turn on the power. (Dolby/DTS Page -- 60 8, 23 36 -- Symptom Power has turned off and the power indicator is blinking red. Cause Measures Page 8 8 No test tones are produced. This unit does not operate properly when remote control unit is used. · Surround mode is set to a mode · Set to STANDARD other than STANDARD (Dolby/DTS Surround). · < and > ends of batteries inserted in reverse. · Set to a mode other than "STEREO". [. . . ]