User manual DENON AVR-1708

[. . . ] AV SURROUND RECEIVER AVR-1708 Owner's Manual Manuel de l'Utilisateur ENGLISH FRANCAIS n SAFETY PRECAUTIONS 1. SAFETY INSTRUCTIONS Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. [. . . ] (The HDMI audio signal is output from the monitor. ) At this time, set the input mode to "Auto" . IN connectors are not output to the monitor. Operations (vpage 22) ENGLISH j iPod Assign Assign Control Dock for iPod to this source. k ~ A0 Component In Assign Select component video input to assign to this source. A5 Audio Delay Compensate for mismatched timing between video and audio. Getting Started [Display] 1. Sp 2. In 3. Op W [Display] 1. Sp 2. In 3. Op W [Display] 1. Sp 2. In 3. Op W Connections Input Setup W Input Setup W Input Setup W 7 iPod VCR 8 COMP1 DVD 15A. Delay 0ms Delay audio. This sets the delay time for audio signals. Setup [Assignable input sources] CD AUX CDR DVD/HDP TV/CBL VCR V. AUX [Input terminals] Component video1 Component video2 Component video3 [Assignable input sources] DVD/HDP TV/CBL VCR V. AUX Component video2 TV/CBL Component video3 VCR Playback [Variable range] 0 ms ~ 200 ms With the default settings, the Control Dock for iPod can be used connected to the VCR (iPod) connector. With a movie source, for example, adjust so that the movement of the actors' lips is synchronized with the sound. Remote Control Input terminals Default setting Component video1 DVD/HDP This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front Speaker" set to "Large" "Tone Defeat" to , "ON" and "Room EQ" to "OFF"). Multi-Zone A1 ~ A4 Video Convert Automatically convert video input signal to monitor output format. A6 EXT. Select according to the player in use. Information [Display] 1. Sp 2. In 3. Op W [Display] 1. Sp 2. In 3. Op W W Troubleshooting Input Setup 11 DVD:Conv ON Input Setup W 16EXT. In SW +15 [Input source] DVD/HDP TV/CBL VCR V. AUX [Selectable items] 0dB +5dB +10dB : Select according to the player in use. [Selectable items] ON OFF : Enable conversion. : Disable conversion. +15dB : This is the recommended level. Operations (vpage 22) ENGLISH A7 Auto Preset Memory Use the auto preset function to program radio stations. Terrestrial Indicate terrestrial signal strength. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting [Display] 1. Sp 2. In 3. Op W Display Condition For details, see "Amp Assign / Multi-zone Connections and Operations" (vpage 47 48). , Input Setup W Signal strength is strong Signal strength is good Signal strength is marginal Signal strength is weak No signal s ~ f Volume Control Set the main zone volume setting. 17 Preset <Start Press the o button to start. · "Completed" appears once searching is completed. [Display] 1. Sp 2. In 3. Op E Option Setup Make various other settings. a s~f g ~ A1 A2 A3 A4 A5 Amp Assign Volume Control 2ch Direct/Stereo Custom Auto Surround Mode Room EQ Setup Direct Mode Setup Remote ID Setup Option Setup E 2 Limit 3 P. On 4 Mute OFF E If an FM station cannot be preset automatically, select the desired station by tuning it in manually, then preset it manually. LAST E FULL A8 Antenna Aiming Adjust the XM radio reception sensitivity. Volume Limit [Display] 1. Sp 2. In 3. Op W a Amp Assign Define how the amplifier for the surround back speaker channels is used. Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. Input Setup W [Display] 1. Sp 2. In 3. Op W E ­20dB : Set the maximum volume to ­20 dB. 0dB E 18 Ant Aiming< SAT:4 < TER:3 > W : Set the maximum volume to 0 dB. Option Setup 1 Amp ZONE2 The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the main zone) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections). Satellite Indicate satellite signal strength. [Selectable items] 7. 1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp Operations (vpage 22) ENGLISH Power On Level This sets the volume set when the main zone's power is turned on. g ~ A1 2ch Direct/Stereo Custom Make speaker settings for 2-channel mode playback. Front Select front speaker size. Getting Started [Selectable items] Last ­­­ : Use the memorized setting from the last session. in units of 1 dB. [Display] 1. Sp 2. In 3. Op E [Selectable items] Large Small : Select front speaker size. Connections ­80dB ~ +18dB : Set the volume level when the power is turned on Option Setup E Subwoofer Select subwoofer use. 5 2ch Cstm 5 2ch Cstm 6 2ch F 7 2ch SW OFF E [Selectable items] Yes E Setup Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. ON Large E No : Select subwoofer use. Playback [Selectable items] Full : The sound is cut off entirely. Subwoofer Mode Select low range signal to be reproduced by subwoofer. Yes E Remote Control ­40dB : The sound is attenuated by 40 dB. ­20dB : The sound is attenuated by 20 dB. 8 2ch LFE 9 2ch FL 10 2ch FR 11 2ch Freq Norm E [Selectable items] LFE (Normal) LFE+Main : Select subwoofer signal. 12ft E 12ft E Distance FL Set distance from listening position to front left speaker. Multi-Zone 80 [Variable range] 0ft ~ 60ft Setting To change the settings, select "ON" . Distance FR Set distance from listening position to front right speaker. Information [Selectable items] OFF ON : Use the same settings as in "Speaker Setup" . : Make separate settings for 2-channel mode. [Variable range] 0ft ~ 60ft Troubleshooting Crossover Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 200Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 250Hz : Select crossover frequency. Operations (vpage 22) ENGLISH A2 Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. A4 Direct Mode Setup Select room EQ use for DIRECT mode. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting [Display] 1. Sp 2. In 3. Op E [Display] 1. Sp 2. In 3. Op E Surround Modes Option Setup E Option Setup E Standard Playback This is the standard mode for enjoying surround sound according to the program source. 14 Direct OFF 12AutoSurr. ON [Selectable items] [Selectable items] ON OFF : Memorize settings. Surround mode does not change according to input signal. ON OFF : Use room EQ. : Do not use room EQ. Surround Playback of 2-channel Sources To select these surround modes using the SELECT/ENTER knob on the main unit or press the STD button on the main remote control unit. n When using a surround back speaker A5 Remote ID Setup Set remote control ID. [Selectable items] DOLBY PLgx DTS NEO:6 n When not using a surround back speaker neural The auto surround mode function lets you store in the memory the surround mode last used for playing the three types of input signals listed below. qAnalog and PCM 2-channel signals (STEREO) w2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLgx Cinema) eMulti-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND) b Default settings are indicated in ( ). [Display] 1. Sp 2. In 3. Op E [Selectable items] DOLBY PLgx or DOLBY PLg E DOLBY PLg DTS NEO:6 neural Option Setup 15 Remote ID 1 : The signals are decoded in DOLBY PLgx or DOLBY PLg for playback. " Cinema Music [Selectable items] 1 2 3 4 Game A3 Room EQ Setup Select room EQ setting method. NOTE When using the AVR-1708 with only the included remote control unit (RC-1075), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc. ), this function can be used. Match the ID setting of the remote control unit and the receiver. E Pro Logic : This is the Pro Logic playback mode. [. . . ] Page 10 ~ 17 ­ ­ Getting Started Connections 30 No sound is produced from subwoofer. · The surround back speaker's power amplifier is assigned to a different channel. · Surround mode not set to a mode for 6. 1- or 7 . 1-channel playback. · The "Subwoofer" setting at "Speaker Setup" is set to "No" . · The subwoofer's volume is turned off. · Check the setting and change it as necessary. [. . . ]